/ usr / bin / [ HOME SHELL ]

Name	Size	Permission
2to3	106 B	-rwxr-xr-x
2to3-3.6	106 B	-rwxr-xr-x
GET	15.84 KB	-rwxr-xr-x
HEAD	15.84 KB	-rwxr-xr-x
Magick-config	1.43 KB	-rwxr-xr-x
MagickCore-config	1.56 KB	-rwxr-xr-x
MagickWand-config	1.56 KB	-rwxr-xr-x
Mail	408.89 KB	-rwxr-xr-x
POST	15.84 KB	-rwxr-xr-x
Wand-config	1.42 KB	-rwxr-xr-x
[	53.6 KB	-rwxr-xr-x
ab	72.63 KB	-rwxr-xr-x
aclocal	35.62 KB	-rwxr-xr-x
aclocal-1.16	35.62 KB	-rwxr-xr-x
acpi_listen	18.26 KB	-rwxr-xr-x
acyclic	12.41 KB	-rwxr-xr-x
addr2line	33.42 KB	-rwxr-xr-x
agentxtrap	24.54 KB	-rwxr-xr-x
alias	29 B	-rwxr-xr-x
animate	11.88 KB	-rwxr-xr-x
apropos	54.04 KB	-rwxr-xr-x
ar	61.96 KB	-rwxr-xr-x
arch	37.34 KB	-rwxr-xr-x
aria_chk	4.53 MB	-rwxr-xr-x
aria_dump_log	4.33 MB	-rwxr-xr-x
aria_ftdump	4.34 MB	-rwxr-xr-x
aria_pack	4.37 MB	-rwxr-xr-x
aria_read_log	4.48 MB	-rwxr-xr-x
arpaname	11.82 KB	-rwxr-xr-x
as	889.91 KB	-rwxr-xr-x
aspell	159.5 KB	-rwxr-xr-x
at	57.33 KB	-rwxr-xr-x
atop	284.66 KB	-rwxr-xr-x
atopconvert	24.66 KB	-rwxr-xr-x
atopd	922 B	-rwxr-xr-x
atopsar	284.66 KB	-rwxr-xr-x
atq	57.33 KB	-rwxr-xr-x
atrm	57.33 KB	-rwxr-xr-x
audit2allow	14.85 KB	-rwxr-xr-x
audit2why	14.85 KB	-rwxr-xr-x
aulast	20.58 KB	-rwxr-xr-x
aulastlog	12.44 KB	-rwxr-xr-x
ausyscall	12.27 KB	-rwxr-xr-x
authselect	41.13 KB	-rwxr-xr-x
autoconf	14.42 KB	-rwxr-xr-x
autoheader	8.33 KB	-rwxr-xr-x
autom4te	31.43 KB	-rwxr-xr-x
automake	251.9 KB	-rwxr-xr-x
automake-1.16	251.9 KB	-rwxr-xr-x
autopoint	25.95 KB	-rwxr-xr-x
autoreconf	20.57 KB	-rwxr-xr-x
autoscan	16.72 KB	-rwxr-xr-x
autoupdate	33.08 KB	-rwxr-xr-x
auvirt	32.73 KB	-rwxr-xr-x
awk	669.77 KB	-rwxr-xr-x
b2sum	57.69 KB	-rwxr-xr-x
base32	41.47 KB	-rwxr-xr-x
base64	41.48 KB	-rwxr-xr-x
basename	37.41 KB	-rwxr-xr-x
bash	1.1 MB	-rwxr-xr-x
bashbug	7.18 KB	-rwxr-xr-x
bashbug-64	7.18 KB	-rwxr-xr-x
batch	137 B	-rwxr-xr-x
bc	94.98 KB	-rwxr-xr-x
bcomps	20.62 KB	-rwxr-xr-x
bdftopcf	45.4 KB	-rwxr-xr-x
bg	26 B	-rwxr-xr-x
bind9-config	3.33 KB	-rwxr-xr-x
bison	437.72 KB	-rwxr-xr-x
bond2team	22.74 KB	-rwxr-xr-x
bootctl	45.15 KB	-rwxr-xr-x
brotli	739.2 KB	-rwxr-xr-x
bunzip2	36.86 KB	-rwxr-xr-x
busctl	77.27 KB	-rwxr-xr-x
bzcat	36.86 KB	-rwxr-xr-x
bzcmp	2.08 KB	-rwxr-xr-x
bzdiff	2.08 KB	-rwxr-xr-x
bzegrep	1.64 KB	-rwxr-xr-x
bzfgrep	1.64 KB	-rwxr-xr-x
bzgrep	1.64 KB	-rwxr-xr-x
bzip2	36.86 KB	-rwxr-xr-x
bzip2recover	16.44 KB	-rwxr-xr-x
bzless	1.23 KB	-rwxr-xr-x
bzmore	1.23 KB	-rwxr-xr-x
c++	1.21 MB	-rwxr-xr-x
c++filt	28.89 KB	-rwxr-xr-x
c89	224 B	-rwxr-xr-x
c99	215 B	-rwxr-xr-x
ca-legacy	1.61 KB	-rwxr-xr-x
cairo-sphinx	69.71 KB	-rwxr-xr-x
cal	65.98 KB	-rwxr-xr-x
captoinfo	85.31 KB	-rwxr-xr-x
cat	37.46 KB	-rwxr-xr-x
catchsegv	3.21 KB	-rwxr-xr-x
catman	41.45 KB	-rwxr-xr-x
cc	1.21 MB	-rwxr-xr-x
ccomps	24.72 KB	-rwxr-xr-x
cd	26 B	-rwxr-xr-x
centrino-decode	11.27 KB	-rwxr-xr-x
certbot	387 B	-rwxr-xr-x
certbot-3	387 B	-rwxr-xr-x
certutil	199.15 KB	-rwxr-xr-x
chacl	16.36 KB	-rwxr-xr-x
chage	77.68 KB	-rwsr-xr-x
chardetect	400 B	-rwxr-xr-x
chattr	16.41 KB	-rwxr-xr-x
chcat	13.57 KB	-rwxr-xr-x
chcon	70.34 KB	-rwxr-xr-x
check-regexp	109.59 KB	-rwxr-xr-x
checkmodule	427.01 KB	-rwxr-xr-x
checkpolicy	488.64 KB	-rwxr-xr-x
chfn	32.9 KB	-rws--x--x
chgrp	66.29 KB	-rwxr-xr-x
chmem	45.47 KB	-rwxr-xr-x
chmod	62.2 KB	-rwxr-xr-x
chown	70.29 KB	-rwxr-xr-x
chronyc	127.6 KB	-rwxr-xr-x
chrt	37.19 KB	-rwxr-xr-x
chsh	24.72 KB	-rwx--x--x
chvt	12.53 KB	-rwxr-xr-x
cifsiostat	41.35 KB	-rwxr-xr-x
circo	12.26 KB	-rwxr-xr-x
cksum	37.39 KB	-rwxr-xr-x
cl-linksafe-apply-group	554 B	-rwxr-xr-x
cl-linksafe-reconfigure	4.83 KB	-rwxr-xr-x
clear	12.54 KB	-rwxr-xr-x
cluster	518.33 KB	-rwxr-xr-x
cmp	103.76 KB	-rwxr-xr-x
cmsutil	122.46 KB	-rwxr-xr-x
col	29.01 KB	-rwxr-xr-x
colcrt	16.48 KB	-rwxr-xr-x
colrm	24.88 KB	-rwxr-xr-x
column	49.47 KB	-rwxr-xr-x
comm	41.56 KB	-rwxr-xr-x
command	31 B	-rwxr-xr-x
compare	11.89 KB	-rwxr-xr-x
compile_et	1.31 KB	-rwxr-xr-x
composite	11.88 KB	-rwxr-xr-x
config_data	6.97 KB	-rwxr-xr-x
conjure	11.88 KB	-rwxr-xr-x
conmon	156.34 KB	-rwxr-xr-x
convert	11.88 KB	-rwxr-xr-x
coredumpctl	44.91 KB	-rwxr-xr-x
corelist	14.64 KB	-rwxr-xr-x
corepack	170 B	-rwxr-xr-x
cp	147.98 KB	-rwxr-xr-x
cpan	8.17 KB	-rwxr-xr-x
cpan-mirrors	4.19 KB	-rwxr-xr-x
cpapi1	3.35 MB	-rwxr-xr-x
cpapi2	3.35 MB	-rwxr-xr-x
cpapi3	3.35 MB	-rwxr-xr-x
cpgcli	84.29 KB	-rwxr-xr-x
cpio	159.8 KB	-rwxr-xr-x
cpp	1.21 MB	-rwxr-xr-x
cpp2html	47 B	-rwxr-xr-x
cpupower	66.91 KB	-rwxr-xr-x
crb	2.58 KB	-rwxr--r--
crc32	1.02 KB	-rwxr-xr-x
crlutil	134.95 KB	-rwxr-xr-x
cronnext	49.8 KB	-rwxr-xr-x
crontab	61.67 KB	-rwsr-xr-x
csplit	53.68 KB	-rwxr-xr-x
csslint-0.6	24.56 KB	-rwxr-xr-x
ctags	272.94 KB	-rwxr-xr-x
curl	230.08 KB	-rwxr-xr-x
cut	49.52 KB	-rwxr-xr-x
cvtsudoers	284.21 KB	-rwxr-xr-x
cxpm	29.11 KB	-rwxr-xr-x
date	105.96 KB	-rwxr-xr-x
db_archive	12.45 KB	-rwxr-xr-x
db_checkpoint	16.48 KB	-rwxr-xr-x
db_deadlock	16.48 KB	-rwxr-xr-x
db_dump	16.51 KB	-rwxr-xr-x
db_dump185	69.55 KB	-rwxr-xr-x
db_hotbackup	20.49 KB	-rwxr-xr-x
db_load	28.61 KB	-rwxr-xr-x
db_log_verify	16.52 KB	-rwxr-xr-x
db_printlog	33.4 KB	-rwxr-xr-x
db_recover	16.51 KB	-rwxr-xr-x
db_replicate	16.49 KB	-rwxr-xr-x
db_stat	16.48 KB	-rwxr-xr-x
db_tuner	24.55 KB	-rwxr-xr-x
db_upgrade	12.45 KB	-rwxr-xr-x
db_verify	16.46 KB	-rwxr-xr-x
dbilogstrip	1.35 KB	-rwxr-xr-x
dbiprof	6.06 KB	-rwxr-xr-x
dbus-binding-tool	110.43 KB	-rwxr-xr-x
dbus-cleanup-sockets	16.39 KB	-rwxr-xr-x
dbus-daemon	239.7 KB	-rwxr-xr-x
dbus-monitor	28.58 KB	-rwxr-xr-x
dbus-run-session	15.88 KB	-rwxr-xr-x
dbus-send	28.54 KB	-rwxr-xr-x
dbus-test-tool	24.6 KB	-rwxr-xr-x
dbus-update-activation-environ...	16.41 KB	-rwxr-xr-x
dbus-uuidgen	12.38 KB	-rwxr-xr-x
dc	53.02 KB	-rwxr-xr-x
dd	77.97 KB	-rwxr-xr-x
deallocvt	12.54 KB	-rwxr-xr-x
debuginfo-install	3.62 KB	-rwxr-xr-x
debuginfod-find	16.47 KB	-rwxr-xr-x
delv	42.46 KB	-rwxr-xr-x
df	91.09 KB	-rwxr-xr-x
diff	268.01 KB	-rwxr-xr-x
diff3	128.6 KB	-rwxr-xr-x
diffimg	12.27 KB	-rwxr-xr-x
dig	162.18 KB	-rwxr-xr-x
dijkstra	16.71 KB	-rwxr-xr-x
dir	139.9 KB	-rwxr-xr-x
dircolors	49.55 KB	-rwxr-xr-x
dirmngr	579.89 KB	-rwxr-xr-x
dirmngr-client	120.12 KB	-rwxr-xr-x
dirname	33.36 KB	-rwxr-xr-x
display	11.88 KB	-rwxr-xr-x
distro	389 B	-rwxr-xr-x
dltest	11.87 KB	-rwxr-xr-x
dmesg	77.88 KB	-rwxr-xr-x
dnf	2.05 KB	-rwxr-xr-x
dnf-3	2.05 KB	-rwxr-xr-x
dnsdomainname	21.16 KB	-rwxr-xr-x
dnstap-read	20.43 KB	-rwxr-xr-x
docker	163 B	-rwxr-xr-x
domainname	21.16 KB	-rwxr-xr-x
dot	12.26 KB	-rwxr-xr-x
dot2gxl	41.3 KB	-rwxr-xr-x
dotty	2.04 KB	-rwxr-xr-x
doveadm	956.56 KB	-rwxr-xr-x
doveconf	397.59 KB	-rwxr-xr-x
dovecot-sysreport	6.28 KB	-rwxr-xr-x
dpkg	316.17 KB	-rwxr-xr-x
dpkg-deb	165.5 KB	-rwxr-xr-x
dpkg-divert	157.75 KB	-rwxr-xr-x
dpkg-maintscript-helper	20.67 KB	-rwxr-xr-x
dpkg-query	165.84 KB	-rwxr-xr-x
dpkg-realpath	4.05 KB	-rwxr-xr-x
dpkg-split	132.39 KB	-rwxr-xr-x
dpkg-statoverride	66.41 KB	-rwxr-xr-x
dpkg-trigger	87.66 KB	-rwxr-xr-x
dracut	67.56 KB	-rwxr-xr-x
dtrace	17.39 KB	-rwxr-xr-x
du	107 KB	-rwxr-xr-x
dumpkeys	169.88 KB	-rwxr-xr-x
dumpsexp	16.43 KB	-rwxr-xr-x
dwp	2.13 MB	-rwxr-xr-x
dwz	167.64 KB	-rwxr-xr-x
ea-php72	5.49 MB	-rwxr-xr-x
ea-php72-pear	383 B	-rwxr-xr-x
ea-php72-pecl	299 B	-rwxr-xr-x
ea-php73	5.32 MB	-rwxr-xr-x
ea-php73-pear	383 B	-rwxr-xr-x
ea-php73-pecl	299 B	-rwxr-xr-x
ea-php74	6.09 MB	-rwxr-xr-x
ea-php74-pear	383 B	-rwxr-xr-x
ea-php74-pecl	299 B	-rwxr-xr-x
ea-php80	7.61 MB	-rwxr-xr-x
ea-php80-pear	383 B	-rwxr-xr-x
ea-php80-pecl	299 B	-rwxr-xr-x
ea-php81	7.72 MB	-rwxr-xr-x
ea-php81-pear	383 B	-rwxr-xr-x
ea-php81-pecl	299 B	-rwxr-xr-x
ea-php82	7.77 MB	-rwxr-xr-x
ea-php82-pear	383 B	-rwxr-xr-x
ea-php82-pecl	299 B	-rwxr-xr-x
ea-php83	7.8 MB	-rwxr-xr-x
ea-php83-pear	383 B	-rwxr-xr-x
ea-php83-pecl	299 B	-rwxr-xr-x
ea-php84	7.85 MB	-rwxr-xr-x
ea-php84-pear	383 B	-rwxr-xr-x
ea-php84-pecl	299 B	-rwxr-xr-x
ea-wappspector	100 B	-rwxr-xr-x
easy_install-3	246 B	-rwxr-xr-x
easy_install-3.6	246 B	-rwxr-xr-x
echo	37.35 KB	-rwxr-xr-x
edgepaint	420.79 KB	-rwxr-xr-x
egrep	28 B	-rwxr-xr-x
eject	57.78 KB	-rwxr-xr-x
elfedit	33.28 KB	-rwxr-xr-x
elinks	1.55 MB	-rwxr-xr-x
enc2xs	40.97 KB	-rwxr-xr-x
encguess	2.91 KB	-rwxr-xr-x
enchant-2	20.25 KB	-rwxr-xr-x
enchant-lsmod-2	12.35 KB	-rwxr-xr-x
env	41.35 KB	-rwxr-xr-x
envml	4.1 KB	-rwxr-xr-x
envsubst	48.99 KB	-rwxr-xr-x
eps2eps	639 B	-rwxr-xr-x
eqn	232.16 KB	-rwxr-xr-x
event_rpcgen.py	54.26 KB	-rwxr-xr-x
evmctl	62.54 KB	-rwxr-xr-x
ex	1.13 MB	-rwxr-xr-x
expand	41.59 KB	-rwxr-xr-x
expr	49.57 KB	-rwxr-xr-x
factor	85.97 KB	-rwxr-xr-x
fallocate	28.96 KB	-rwxr-xr-x
false	33.32 KB	-rwxr-xr-x
fc	26 B	-rwxr-xr-x
fc-cache	132 B	-rwxr-xr-x
fc-cache-64	20.35 KB	-rwxr-xr-x
fc-cat	16.35 KB	-rwxr-xr-x
fc-conflist	12.25 KB	-rwxr-xr-x
fc-list	12.25 KB	-rwxr-xr-x
fc-match	16.26 KB	-rwxr-xr-x
fc-pattern	12.26 KB	-rwxr-xr-x
fc-query	12.24 KB	-rwxr-xr-x
fc-scan	12.26 KB	-rwxr-xr-x
fc-validate	16.26 KB	-rwxr-xr-x
fdp	12.26 KB	-rwxr-xr-x
fg	26 B	-rwxr-xr-x
fgconsole	12.55 KB	-rwxr-xr-x
fgrep	28 B	-rwxr-xr-x
filan	94.72 KB	-rwxr-xr-x
file	24.69 KB	-rwxr-xr-x
fincore	33.04 KB	-rwxr-xr-x
find	223.27 KB	-rwxr-xr-x
find-repos-of-install	3.62 KB	-rwxr-xr-x
findmnt	70.61 KB	-rwxr-xr-x
fips-finish-install	1.29 KB	-rwxr-xr-x
fips-mode-setup	3.91 KB	-rwxr-xr-x
firewall-cmd	139.6 KB	-rwxr-xr-x
firewall-offline-cmd	120.73 KB	-rwxr-xr-x
flex	428.45 KB	-rwxr-xr-x
flex++	428.45 KB	-rwxr-xr-x
flock	33.2 KB	-rwxr-xr-x
fmt	45.49 KB	-rwxr-xr-x
fold	41.42 KB	-rwxr-xr-x
fonttosfnt	41.18 KB	-rwxr-xr-x
free	20.79 KB	-rwxr-xr-x
freetype-config	4.31 KB	-rwxr-xr-x
fribidi	21.14 KB	-rwxr-xr-x
ftp	101.2 KB	-rwxr-xr-x
funzip	36.63 KB	-rwxr-xr-x
fuse-overlayfs	107.08 KB	-rwxr-xr-x
fusermount3	36.73 KB	-rwsr-xr-x
g++	1.21 MB	-rwxr-xr-x
g13	211.98 KB	-rwxr-xr-x
galera_new_cluster	924 B	-rwxr-xr-x
galera_recovery	3.29 KB	-rwxr-xr-x
gapplication	20.45 KB	-rwxr-xr-x
garb-systemd	1.31 KB	-rwxr-xr-x
garbd	1.65 MB	-rwxr-xr-x
gawk	669.77 KB	-rwxr-xr-x
gc	16.64 KB	-rwxr-xr-x
gcc	1.21 MB	-rwxr-xr-x
gcc-ar	36.66 KB	-rwxr-xr-x
gcc-nm	36.66 KB	-rwxr-xr-x
gcc-ranlib	36.66 KB	-rwxr-xr-x
gcov	1.31 MB	-rwxr-xr-x
gcov-dump	570.96 KB	-rwxr-xr-x
gcov-tool	607.77 KB	-rwxr-xr-x
gdbm_dump	21.05 KB	-rwxr-xr-x
gdbm_load	25.31 KB	-rwxr-xr-x
gdbmtool	111.57 KB	-rwxr-xr-x
gdbus	48.72 KB	-rwxr-xr-x
gdk-pixbuf-query-loaders-64	15.93 KB	-rwxr-xr-x
gdk-pixbuf-thumbnailer	20.45 KB	-rwxr-xr-x
gdlib-config	2.79 KB	-rwxr-xr-x
gencat	24.84 KB	-rwxr-xr-x
genl-ctrl-list	12.04 KB	-rwxr-xr-x
geqn	232.16 KB	-rwxr-xr-x
getconf	32.46 KB	-rwxr-xr-x
getent	33.13 KB	-rwxr-xr-x
getfacl	25.38 KB	-rwxr-xr-x
getkeycodes	12.54 KB	-rwxr-xr-x
getopt	20.53 KB	-rwxr-xr-x
getopts	31 B	-rwxr-xr-x
getsubids	12.34 KB	-rwxr-xr-x
gettext	48.97 KB	-rwxr-xr-x
gettext.sh	4.52 KB	-rwxr-xr-x
gettextize	42.69 KB	-rwxr-xr-x
ghostscript	12.35 KB	-rwxr-xr-x
gio	85.22 KB	-rwxr-xr-x
gio-querymodules-64	16.3 KB	-rwxr-xr-x
git	26.38 MB	-rwxr-xr-x
git-receive-pack	26.38 MB	-rwxr-xr-x
git-shell	15.79 MB	-rwxr-xr-x
git-upload-archive	26.38 MB	-rwxr-xr-x
git-upload-pack	26.38 MB	-rwxr-xr-x
glib-compile-schemas	48.85 KB	-rwxr-xr-x
gmake	235.32 KB	-rwxr-xr-x
gml2gv	41.23 KB	-rwxr-xr-x
gneqn	908 B	-rwxr-xr-x
gnroff	3.23 KB	-rwxr-xr-x
gpasswd	82.17 KB	-rwsr-xr-x
gpg	1.04 MB	-rwxr-xr-x
gpg-agent	419.3 KB	-rwxr-xr-x
gpg-connect-agent	165.3 KB	-rwxr-xr-x
gpg-error	34.16 KB	-rwxr-xr-x
gpg-error-config	2.26 KB	-rwxr-xr-x
gpg-wks-server	206.71 KB	-rwxr-xr-x
gpg-zip	3.44 KB	-rwxr-xr-x
gpg2	1.04 MB	-rwxr-xr-x
gpgconf	176.1 KB	-rwxr-xr-x
gpgme-json	85.68 KB	-rwxr-xr-x
gpgparsemail	28.74 KB	-rwxr-xr-x
gpgrt-config	2.26 KB	-rwxr-xr-x
gpgsm	514.46 KB	-rwxr-xr-x
gpgsplit	87.02 KB	-rwxr-xr-x
gpgv	451.51 KB	-rwxr-xr-x
gpgv2	451.51 KB	-rwxr-xr-x
gpic	293.84 KB	-rwxr-xr-x
gpio-event-mon	14.96 KB	-rwxr-xr-x
gpio-hammer	14.96 KB	-rwxr-xr-x
gprof	103.35 KB	-rwxr-xr-x
gr2fonttest	29.95 KB	-rwxr-xr-x
graphml2gv	20.65 KB	-rwxr-xr-x
grep	193.63 KB	-rwxr-xr-x
groff	124.92 KB	-rwxr-xr-x
grops	191.14 KB	-rwxr-xr-x
grotty	141.9 KB	-rwxr-xr-x
groups	37.39 KB	-rwxr-xr-x
grub2-editenv	448.09 KB	-rwxr-xr-x
grub2-file	928.53 KB	-rwxr-xr-x
grub2-fstest	1.15 MB	-rwxr-xr-x
grub2-glue-efi	279.41 KB	-rwxr-xr-x
grub2-kbdcomp	1.63 KB	-rwxr-xr-x
grub2-menulst2cfg	262.65 KB	-rwxr-xr-x
grub2-mkfont	312.12 KB	-rwxr-xr-x
grub2-mkimage	431.41 KB	-rwxr-xr-x
grub2-mklayout	289.48 KB	-rwxr-xr-x
grub2-mknetdir	485.75 KB	-rwxr-xr-x
grub2-mkpasswd-pbkdf2	291.88 KB	-rwxr-xr-x
grub2-mkrelpath	279.27 KB	-rwxr-xr-x
grub2-mkrescue	1.12 MB	-rwxr-xr-x
grub2-mkstandalone	594.31 KB	-rwxr-xr-x
grub2-render-label	937.13 KB	-rwxr-xr-x
grub2-script-check	316 KB	-rwxr-xr-x
grub2-syslinux2cfg	861.61 KB	-rwxr-xr-x
gs	12.35 KB	-rwxr-xr-x
gsettings	28.61 KB	-rwxr-xr-x
gsnd	277 B	-rwxr-xr-x
gsoelim	42.55 KB	-rwxr-xr-x
gss-client	24.56 KB	-rwxr-xr-x
gtar	448.99 KB	-rwxr-xr-x
gtbl	154.61 KB	-rwxr-xr-x
gtk-query-immodules-2.0-64	16.29 KB	-rwxr-xr-x
gtk-update-icon-cache	33.03 KB	-rwxr-xr-x
gtroff	805.02 KB	-rwxr-xr-x
guild	2.8 KB	-rwxr-xr-x
guile	13.16 KB	-rwxr-xr-x
guile-tools	2.8 KB	-rwxr-xr-x
guile2	13.16 KB	-rwxr-xr-x
guile2-tools	2.8 KB	-rwxr-xr-x
gunzip	2.29 KB	-rwxr-xr-x
gv2gml	24.7 KB	-rwxr-xr-x
gv2gxl	41.3 KB	-rwxr-xr-x
gvcolor	46.9 KB	-rwxr-xr-x
gvgen	24.8 KB	-rwxr-xr-x
gvmap	526.31 KB	-rwxr-xr-x
gvmap.sh	2.14 KB	-rwxr-xr-x
gvpack	460.59 KB	-rwxr-xr-x
gvpr	7.83 KB	-rwxr-xr-x
gxl2dot	41.3 KB	-rwxr-xr-x
gxl2gv	41.3 KB	-rwxr-xr-x
gzexe	6.23 KB	-rwxr-xr-x
gzip	94.67 KB	-rwxr-xr-x
h2ph	28.69 KB	-rwxr-xr-x
h2xs	59.44 KB	-rwxr-xr-x
hash	28 B	-rwxr-xr-x
head	45.5 KB	-rwxr-xr-x
hexdump	57.51 KB	-rwxr-xr-x
hmac256	16.86 KB	-rwxr-xr-x
host	142.3 KB	-rwxr-xr-x
hostid	33.34 KB	-rwxr-xr-x
hostname	21.16 KB	-rwxr-xr-x
hostnamectl	20.83 KB	-rwxr-xr-x
htdbm	31.72 KB	-rwxr-xr-x
htdigest	21.71 KB	-rwxr-xr-x
html2text	406 B	-rwxr-xr-x
htop	304.73 KB	-rwxr-xr-x
htpasswd	31.55 KB	-rwxr-xr-x
httxt2dbm	21.1 KB	-rwxr-xr-x
hunspell	144.7 KB	-rwxr-xr-x
i386	20.76 KB	-rwxr-xr-x
iceauth	41.87 KB	-rwxr-xr-x
iconv	61.43 KB	-rwxr-xr-x
id	45.44 KB	-rwxr-xr-x
identify	11.88 KB	-rwxr-xr-x
idiag-socket-details	12.09 KB	-rwxr-xr-x
idn	39.41 KB	-rwxr-xr-x
ifnames	4.03 KB	-rwxr-xr-x
iio_event_monitor	22.98 KB	-rwxr-xr-x
iio_generic_buffer	26.98 KB	-rwxr-xr-x
import	11.88 KB	-rwxr-xr-x
imunify-agent-proxy	13.14 MB	-rwxr-xr-x
imunify-antivirus	1 KB	-rwxr-xr-x
imunify-fgw-dump	7.8 MB	-rwxr-xr-x
imunify-service	1020 B	-rwxr-xr-x
imunify360-agent	1 KB	-rwxr-xr-x
imunify360-command-wrapper	11.92 KB	-rwxr-xr-x
info	249.89 KB	-rwxr-xr-x
infocmp	61.05 KB	-rwxr-xr-x
infotocap	85.31 KB	-rwxr-xr-x
innochecksum	3.59 MB	-rwxr-xr-x
install	156.16 KB	-rwxr-xr-x
instmodsh	4.1 KB	-rwxr-xr-x
intel-speed-select	93.02 KB	-rwxr-xr-x
ionice	28.98 KB	-rwxr-xr-x
iostat	57.69 KB	-rwxr-xr-x
ipcalc	46.08 KB	-rwxr-xr-x
ipcmk	29.14 KB	-rwxr-xr-x
ipcrm	28.99 KB	-rwxr-xr-x
ipcs	53.4 KB	-rwxr-xr-x
isc-config.sh	3.33 KB	-rwxr-xr-x
isosize	24.88 KB	-rwxr-xr-x
ispell	988 B	-rwxr-xr-x
isql	36.58 KB	-rwxr-xr-x
iusql	28.66 KB	-rwxr-xr-x
java2html	48 B	-rwxr-xr-x
jobs	28 B	-rwxr-xr-x
join	53.7 KB	-rwxr-xr-x
journalctl	76.99 KB	-rwxr-xr-x
json_pp	4.19 KB	-rwxr-xr-x
json_reformat	16.55 KB	-rwxr-xr-x
json_verify	12.27 KB	-rwxr-xr-x
json_xs	6.84 KB	-rwxr-xr-x
jws	373 B	-rwxr-xr-x
kbd_mode	12.55 KB	-rwxr-xr-x
kbdinfo	16.56 KB	-rwxr-xr-x
kbdrate	16.45 KB	-rwxr-xr-x
kbxutil	177.35 KB	-rwxr-xr-x
kcare-scanner-interface	5.96 KB	-rwxr-xr-x
kcare-uname	582 B	-rwxr-xr-x
kcarectl	1.21 KB	-rwxr-xr-x
kdumpctl	32.93 KB	-rwxr-xr-x
kernel-install	4.41 KB	-rwxr-xr-x
keyctl	36.82 KB	-rwxr-xr-x
kill	37.28 KB	-rwxr-xr-x
killall	29.77 KB	-rwxr-xr-x
kmod	159.95 KB	-rwxr-xr-x
krb5-config	6.98 KB	-rwxr-xr-x
kvm_stat	60.85 KB	-rwxr-xr-x
last	49.23 KB	-rwxr-xr-x
lastb	49.23 KB	-rwxr-xr-x
lastlog	20.63 KB	-rwxr-xr-x
lchfn	20.35 KB	-rwxr-xr-x
lchsh	16.35 KB	-rwxr-xr-x
ld	1.71 MB	-rwxr-xr-x
ld.bfd	1.71 MB	-rwxr-xr-x
ld.gold	2.35 MB	-rwxr-xr-x
ld.so	1.05 MB	-rwxr-xr-x
ldd	5.31 KB	-rwxr-xr-x
lefty	304.52 KB	-rwxr-xr-x
less	173.76 KB	-rwxr-xr-x
lessecho	12.4 KB	-rwxr-xr-x
lesskey	21.99 KB	-rwxr-xr-x
lesspipe.sh	3.07 KB	-rwxr-xr-x
letsencrypt	387 B	-rwxr-xr-x
lex	428.45 KB	-rwxr-xr-x
lexgrog	93.7 KB	-rwxr-xr-x
libcare-cron	1.07 KB	-rwxr-xr-x
libgcrypt-config	3.84 KB	-rwxr-xr-x
libnetcfg	15.41 KB	-rwxr-xr-x
libpng-config	2.33 KB	-rwxr-xr-x
libpng16-config	2.33 KB	-rwxr-xr-x
libtool	359.11 KB	-rwxr-xr-x
libtoolize	126.17 KB	-rwxr-xr-x
libwmf-fontmap	13.03 KB	-rwxr-xr-x
link	33.34 KB	-rwxr-xr-x
links	1.55 MB	-rwxr-xr-x
linux-boot-prober	5.85 KB	-rwxr-xr-x
linux32	20.76 KB	-rwxr-xr-x
linux64	20.76 KB	-rwxr-xr-x
ln	70.5 KB	-rwxr-xr-x
lnav	3.57 MB	-rwxr-xr-x
lneato	1.51 KB	-rwxr-xr-x
loadkeys	210.53 KB	-rwxr-xr-x
loadunimap	29.03 KB	-rwxr-xr-x
locale	56.44 KB	-rwxr-xr-x
localectl	28.86 KB	-rwxr-xr-x
localedef	307.47 KB	-rwxr-xr-x
locate	47.41 KB	-rwx--s--x
logger	49.98 KB	-rwxr-xr-x
login	40.96 KB	-rwxr-xr-x
loginctl	57.28 KB	-rwxr-xr-x
logname	33.34 KB	-rwxr-xr-x
logresolve	21.45 KB	-rwxr-xr-x
look	16.46 KB	-rwxr-xr-x
ls	139.91 KB	-rwxr-xr-x
lsattr	11.93 KB	-rwxr-xr-x
lsblk	90.14 KB	-rwxr-xr-x
lscpu	81.7 KB	-rwxr-xr-x
lsgpio	15.06 KB	-rwxr-xr-x
lsiio	22.98 KB	-rwxr-xr-x
lsinitrd	8.68 KB	-rwxr-xr-x
lsipc	73.74 KB	-rwxr-xr-x
lslocks	37.53 KB	-rwxr-xr-x
lslogins	65.62 KB	-rwxr-xr-x
lsmem	45.34 KB	-rwxr-xr-x
lsns	49.29 KB	-rwxr-xr-x
lsof	175.4 KB	-rwxr-xr-x
lsphp	937 B	-rwxr-xr-x
lsscsi	86.01 KB	-rwxr-xr-x
lua	20.45 KB	-rwxr-xr-x
luac	152.77 KB	-rwxr-xr-x
lwp-download	10.05 KB	-rwxr-xr-x
lwp-dump	2.65 KB	-rwxr-xr-x
lwp-mirror	2.36 KB	-rwxr-xr-x
lwp-request	15.84 KB	-rwxr-xr-x
lynx	1.84 MB	-rwxr-xr-x
lzcat	82.09 KB	-rwxr-xr-x
lzcmp	6.48 KB	-rwxr-xr-x
lzdiff	6.48 KB	-rwxr-xr-x
lzegrep	5.76 KB	-rwxr-xr-x
lzfgrep	5.76 KB	-rwxr-xr-x
lzgrep	5.76 KB	-rwxr-xr-x
lzless	1.76 KB	-rwxr-xr-x
lzma	82.09 KB	-rwxr-xr-x
lzmadec	16.48 KB	-rwxr-xr-x
lzmainfo	12.36 KB	-rwxr-xr-x
lzmore	2.11 KB	-rwxr-xr-x
m4	185.56 KB	-rwxr-xr-x
machinectl	89.67 KB	-rwxr-xr-x
mail	408.89 KB	-rwxr-xr-x
mailx	408.89 KB	-rwxr-xr-x
make	235.32 KB	-rwxr-xr-x
make-dummy-cert	610 B	-rwxr-xr-x
makedb	24.84 KB	-rwxr-xr-x
man	112.52 KB	-rwxr-xr-x
mandb	134.52 KB	-rwxr-xr-x
manpath	33.42 KB	-rwxr-xr-x
mapscrn	24.84 KB	-rwxr-xr-x
mariadb	4.34 MB	-rwxr-xr-x
mariadb-access	109.34 KB	-rwxr-xr-x
mariadb-admin	3.88 MB	-rwxr-xr-x
mariadb-binlog	4.14 MB	-rwxr-xr-x
mariadb-check	3.88 MB	-rwxr-xr-x
mariadb-config	12.2 KB	-rwxr-xr-x
mariadb-conv	3.59 MB	-rwxr-xr-x
mariadb-convert-table-format	4.12 KB	-rwxr-xr-x
mariadb-dump	3.96 MB	-rwxr-xr-x
mariadb-dumpslow	8.05 KB	-rwxr-xr-x
mariadb-embedded	22.57 MB	-rwxr-xr-x
mariadb-find-rows	3.21 KB	-rwxr-xr-x
mariadb-fix-extensions	1.22 KB	-rwxr-xr-x
mariadb-hotcopy	34.15 KB	-rwxr-xr-x
mariadb-import	3.87 MB	-rwxr-xr-x
mariadb-install-db	22.46 KB	-rwxr-xr-x
mariadb-plugin	3.57 MB	-rwxr-xr-x
mariadb-secure-installation	13.48 KB	-rwxr-xr-x
mariadb-service-convert	2.45 KB	-rwxr-xr-x
mariadb-setpermission	17.56 KB	-rwxr-xr-x
mariadb-show	3.87 MB	-rwxr-xr-x
mariadb-slap	3.88 MB	-rwxr-xr-x
mariadb-tzinfo-to-sql	3.57 MB	-rwxr-xr-x
mariadb-upgrade	4 MB	-rwxr-xr-x
mariadb-waitpid	3.55 MB	-rwxr-xr-x
mariadb_config	12.2 KB	-rwxr-xr-x
mariadbd-multi	26.71 KB	-rwxr-xr-x
mariadbd-safe	30.42 KB	-rwxr-xr-x
mariadbd-safe-helper	3.52 MB	-rwxr-xr-x
mc	1.3 MB	-rwxr-xr-x
mcdiff	1.3 MB	-rwxr-xr-x
mcedit	1.3 MB	-rwxr-xr-x
mcookie	33.27 KB	-rwxr-xr-x
mcpp	9.02 KB	-rwxr-xr-x
mcview	1.3 MB	-rwxr-xr-x
md5sum	45.54 KB	-rwxr-xr-x
mdig	48.52 KB	-rwxr-xr-x
memcached	209.63 KB	-rwxr-xr-x
memcached-tool	6.05 KB	-rwxr-xr-x
memstrack	83.78 KB	-rwxr-xr-x
mesg	16.36 KB	-rwxr-xr-x
mkdir	82.7 KB	-rwxr-xr-x
mkfifo	66.46 KB	-rwxr-xr-x
mkfontdir	65 B	-rwxr-xr-x
mkfontscale	41.59 KB	-rwxr-xr-x
mkinitrd	6.43 KB	-rwxr-xr-x
mknod	70.47 KB	-rwxr-xr-x
mktemp	45.66 KB	-rwxr-xr-x
mm2gv	90.53 KB	-rwxr-xr-x
mmdblookup	16.74 KB	-rwxr-xr-x
modulecmd	384.75 KB	-rwxr-xr-x
modulemd-validator	24.96 KB	-rwxr-xr-x
modutil	177.43 KB	-rwxr-xr-x
mogrify	11.88 KB	-rwxr-xr-x
mokutil	49.98 KB	-rwxr-xr-x
montage	11.88 KB	-rwxr-xr-x
more	44.94 KB	-rwxr-xr-x
mount	49.15 KB	-rwsr-xr-x
mountpoint	16.48 KB	-rwxr-xr-x
mpicalc	20.38 KB	-rwxr-xr-x
mpstat	53.51 KB	-rwxr-xr-x
msgattrib	25.58 KB	-rwxr-xr-x
msgcat	25.55 KB	-rwxr-xr-x
msgcmp	26.12 KB	-rwxr-xr-x
msgcomm	25.55 KB	-rwxr-xr-x
msgconv	21.55 KB	-rwxr-xr-x
msgen	21.55 KB	-rwxr-xr-x
msgexec	21.55 KB	-rwxr-xr-x
msgfilter	34.53 KB	-rwxr-xr-x
msgfmt	90.3 KB	-rwxr-xr-x
msggrep	43.6 KB	-rwxr-xr-x
msginit	67.85 KB	-rwxr-xr-x
msgmerge	71.48 KB	-rwxr-xr-x
msgunfmt	35.8 KB	-rwxr-xr-x
msguniq	25.56 KB	-rwxr-xr-x
msql2mysql	1.41 KB	-rwxr-xr-x
multitail	329.2 KB	-rwxr-xr-x
mv	143.96 KB	-rwxr-xr-x
my_print_defaults	3.56 MB	-rwxr-xr-x
myisam_ftdump	3.89 MB	-rwxr-xr-x
myisamchk	4.01 MB	-rwxr-xr-x
myisamlog	3.87 MB	-rwxr-xr-x
myisampack	3.91 MB	-rwxr-xr-x
mysql	4.34 MB	-rwxr-xr-x
mysql_config	4.51 KB	-rwxr-xr-x
mysql_embedded	22.57 MB	-rwxr-xr-x
mysql_find_rows	3.21 KB	-rwxr-xr-x
mysql_fix_extensions	1.22 KB	-rwxr-xr-x
mysql_install_db	22.46 KB	-rwxr-xr-x
mysql_plugin	3.57 MB	-rwxr-xr-x
mysql_tzinfo_to_sql	3.57 MB	-rwxr-xr-x
mysql_upgrade	4 MB	-rwxr-xr-x
mysql_waitpid	3.55 MB	-rwxr-xr-x
mysqlaccess	109.34 KB	-rwxr-xr-x
mysqladmin	3.88 MB	-rwxr-xr-x
mysqlbinlog	4.14 MB	-rwxr-xr-x
mysqlcheck	3.88 MB	-rwxr-xr-x
mysqld_multi	26.71 KB	-rwxr-xr-x
mysqld_safe	30.42 KB	-rwxr-xr-x
mysqld_safe_helper	3.52 MB	-rwxr-xr-x
mysqldump	3.96 MB	-rwxr-xr-x
mysqlimport	3.87 MB	-rwxr-xr-x
mysqlshow	3.87 MB	-rwxr-xr-x
mysqlslap	3.88 MB	-rwxr-xr-x
mytop	71.95 KB	-rwxr-xr-x
nail	408.89 KB	-rwxr-xr-x
named-rrchecker	19.88 KB	-rwxr-xr-x
namei	33.1 KB	-rwxr-xr-x
nano	247.94 KB	-rwxr-xr-x
nc	49.39 KB	-rwxr-xr-x
ncat	436.8 KB	-rwxr-xr-x
ncdu	89.88 KB	-rwxr-xr-x
ncurses6-config	5.87 KB	-rwxr-xr-x
ncursesw6-config	5.88 KB	-rwxr-xr-x
ndptool	24.45 KB	-rwxr-xr-x
neato	12.26 KB	-rwxr-xr-x
needs-restarting	3.62 KB	-rwxr-xr-x
neqn	908 B	-rwxr-xr-x
net-snmp-create-v3-user	3.15 KB	-rwxr-xr-x
netcat	49.39 KB	-rwxr-xr-x
netstat	158.68 KB	-rwxr-xr-x
newgidmap	47.81 KB	-rwxr-xr-x
newgrp	42.46 KB	-rwsr-xr-x
newuidmap	47.77 KB	-rwxr-xr-x
nf-ct-add	16.46 KB	-rwxr-xr-x
nf-ct-events	12.38 KB	-rwxr-xr-x
nf-ct-list	16.49 KB	-rwxr-xr-x
nf-exp-add	16.87 KB	-rwxr-xr-x
nf-exp-delete	16.66 KB	-rwxr-xr-x
nf-exp-list	16.49 KB	-rwxr-xr-x
nf-log	12.35 KB	-rwxr-xr-x
nf-monitor	12.36 KB	-rwxr-xr-x
nf-queue	16.35 KB	-rwxr-xr-x
ngettext	48.97 KB	-rwxr-xr-x
nice	37.33 KB	-rwxr-xr-x
nisdomainname	21.16 KB	-rwxr-xr-x
nl	45.55 KB	-rwxr-xr-x
nl-addr-add	12.34 KB	-rwxr-xr-x
nl-addr-delete	16.77 KB	-rwxr-xr-x
nl-addr-list	16.88 KB	-rwxr-xr-x
nl-class-add	16.73 KB	-rwxr-xr-x
nl-class-delete	12.63 KB	-rwxr-xr-x
nl-class-list	12.59 KB	-rwxr-xr-x
nl-classid-lookup	12.47 KB	-rwxr-xr-x
nl-cls-add	16.77 KB	-rwxr-xr-x
nl-cls-delete	16.77 KB	-rwxr-xr-x
nl-cls-list	12.73 KB	-rwxr-xr-x
nl-fib-lookup	12.5 KB	-rwxr-xr-x
nl-link-enslave	11.87 KB	-rwxr-xr-x
nl-link-ifindex2name	11.87 KB	-rwxr-xr-x
nl-link-list	12.23 KB	-rwxr-xr-x
nl-link-name2ifindex	11.86 KB	-rwxr-xr-x
nl-link-release	11.86 KB	-rwxr-xr-x
nl-link-set	12.77 KB	-rwxr-xr-x
nl-link-stats	12.59 KB	-rwxr-xr-x
nl-list-caches	12.27 KB	-rwxr-xr-x
nl-list-sockets	11.87 KB	-rwxr-xr-x
nl-monitor	12.52 KB	-rwxr-xr-x
nl-neigh-add	12.63 KB	-rwxr-xr-x
nl-neigh-delete	12.66 KB	-rwxr-xr-x
nl-neigh-list	12.19 KB	-rwxr-xr-x
nl-neightbl-list	12.01 KB	-rwxr-xr-x
nl-pktloc-lookup	12.56 KB	-rwxr-xr-x
nl-qdisc-add	12.65 KB	-rwxr-xr-x
nl-qdisc-delete	12.63 KB	-rwxr-xr-x
nl-qdisc-list	16.74 KB	-rwxr-xr-x
nl-route-add	16.39 KB	-rwxr-xr-x
nl-route-delete	16.88 KB	-rwxr-xr-x
nl-route-get	12.35 KB	-rwxr-xr-x
nl-route-list	16.44 KB	-rwxr-xr-x
nl-rule-list	12.05 KB	-rwxr-xr-x
nl-tctree-list	12.66 KB	-rwxr-xr-x
nl-util-addr	11.85 KB	-rwxr-xr-x
nload	234.35 KB	-rwxr-xr-x
nm	50.38 KB	-rwxr-xr-x
nm-online	20.84 KB	-rwxr-xr-x
nmcli	1009 KB	-rwxr-xr-x
nmtui	784.12 KB	-rwxr-xr-x
nmtui-connect	784.12 KB	-rwxr-xr-x
nmtui-edit	784.12 KB	-rwxr-xr-x
nmtui-hostname	784.12 KB	-rwxr-xr-x
node	47.8 MB	-rwxr-xr-x
nohup	37.41 KB	-rwxr-xr-x
nop	12.5 KB	-rwxr-xr-x
npm	50 B	-rwxr-xr-x
nproc	37.41 KB	-rwxr-xr-x
npx	2.85 KB	-rwxr-xr-x
nroff	3.23 KB	-rwxr-xr-x
nsenter	33.3 KB	-rwxr-xr-x
nslookup	146.26 KB	-rwxr-xr-x
nss-policy-check	16.3 KB	-rwxr-xr-x
nsupdate	73.05 KB	-rwxr-xr-x
numfmt	65.64 KB	-rwxr-xr-x
objcopy	240.07 KB	-rwxr-xr-x
objdump	419.76 KB	-rwxr-xr-x
od	73.8 KB	-rwxr-xr-x
odbc_config	11.84 KB	-rwxr-xr-x
odbcinst	28.88 KB	-rwxr-xr-x
open	20.97 KB	-rwxr-xr-x
openssl	745.95 KB	-rwxr-xr-x
openvt	20.97 KB	-rwxr-xr-x
os-prober	5.78 KB	-rwxr-xr-x
osage	12.26 KB	-rwxr-xr-x
p11-kit	37.15 KB	-rwxr-xr-x
package-cleanup	3.62 KB	-rwxr-xr-x
page_owner_sort	11.34 KB	-rwxr-xr-x
pango-list	11.88 KB	-rwxr-xr-x
pango-view	57.44 KB	-rwxr-xr-x
paperconf	13.07 KB	-rwxr-xr-x
passwd	32.77 KB	-rwsr-xr-x
paste	37.4 KB	-rwxr-xr-x
patch	206.46 KB	-rwxr-xr-x
patchwork	12.26 KB	-rwxr-xr-x
pathchk	37.34 KB	-rwxr-xr-x
pathfix.py	6.63 KB	-rwxr-xr-x
pcre-config	2.09 KB	-rwxr-xr-x
pcre2-config	1.9 KB	-rwxr-xr-x
pdf2dsc	698 B	-rwxr-xr-x
pdf2ps	909 B	-rwxr-xr-x
peekfd	16.51 KB	-rwxr-xr-x
perl	12.43 KB	-rwxr-xr-x
perl5.26.3	12.43 KB	-rwxr-xr-x
perlbug	44.39 KB	-rwxr-xr-x
perldoc	118 B	-rwxr-xr-x
perlivp	10.56 KB	-rwxr-xr-x
perlml	6.61 KB	-rwxr-xr-x
perlthanks	44.39 KB	-rwxr-xr-x
perror	3.75 MB	-rwxr-xr-x
pflags	2.57 KB	-rwxr-xr-x
pftp	101.2 KB	-rwxr-xr-x
pgrep	28.84 KB	-rwxr-xr-x
php	937 B	-rwxr-xr-x
pic	293.84 KB	-rwxr-xr-x
piconv	8.08 KB	-rwxr-xr-x
pidof	16.7 KB	-rwxr-xr-x
pidstat	65.72 KB	-rwxr-xr-x
pigz	125.38 KB	-rwxr-xr-x
pinentry	2.35 KB	-rwxr-xr-x
pinentry-curses	77.89 KB	-rwxr-xr-x
ping	66.13 KB	-rwxr-xr-x
pinky	41.46 KB	-rwxr-xr-x
pip-3	209 B	-rwxr-xr-x
pip-3.6	209 B	-rwxr-xr-x
pip3	209 B	-rwxr-xr-x
pip3.6	209 B	-rwxr-xr-x
pk12util	111.12 KB	-rwxr-xr-x
pkaction	16.38 KB	-rwxr-xr-x
pkcheck	24.43 KB	-rwxr-xr-x
pkexec	28.41 KB	-rwxr-xr-x
pkg-config	40.04 KB	-rwxr-xr-x
pkgconf	40.04 KB	-rwxr-xr-x
pkill	28.84 KB	-rwxr-xr-x
pkla-admin-identities	25.72 KB	-rwxr-xr-x
pkla-check-authorization	33.78 KB	-rwxr-xr-x
pkttyagent	20.38 KB	-rwxr-xr-x
pl2pm	4.43 KB	-rwxr-xr-x
pldd	16.75 KB	-rwxr-xr-x
plesk_configure	342 B	-rwxr-xr-x
plymouth	45.24 KB	-rwxr-xr-x
pmap	32.78 KB	-rwxr-xr-x
png-fix-itxt	11.85 KB	-rwxr-xr-x
pngfix	52.85 KB	-rwxr-xr-x
pod2html	4.04 KB	-rwxr-xr-x
pod2man	14.68 KB	-rwxr-xr-x
pod2text	10.55 KB	-rwxr-xr-x
pod2usage	3.86 KB	-rwxr-xr-x
podchecker	3.57 KB	-rwxr-xr-x
podman	48.68 MB	-rwxr-xr-x
podmansh	48.68 MB	-rwxr-xr-x
podselect	2.47 KB	-rwxr-xr-x
post-grohtml	238.73 KB	-rwxr-xr-x
powernow-k8-decode	10.88 KB	-rwxr-xr-x
pr	82.15 KB	-rwxr-xr-x
pre-grohtml	130.55 KB	-rwxr-xr-x
precat	5.52 KB	-rwxr-xr-x
preconv	57.65 KB	-rwxr-xr-x
preunzip	5.52 KB	-rwxr-xr-x
prezip	5.52 KB	-rwxr-xr-x
prezip-bin	11.98 KB	-rwxr-xr-x
printenv	33.32 KB	-rwxr-xr-x
printf	53.56 KB	-rwxr-xr-x
prlimit	37.54 KB	-rwxr-xr-x
procan	82.6 KB	-rwxr-xr-x
protoc	16.49 KB	-rwxr-xr-x
protoc-c	244.79 KB	-rwxr-xr-x
protoc-gen-c	244.79 KB	-rwxr-xr-x
prove	13.24 KB	-rwxr-xr-x
prtstat	20.51 KB	-rwxr-xr-x
prune	16.73 KB	-rwxr-xr-x
ps	134.75 KB	-rwxr-xr-x
ps2ascii	631 B	-rwxr-xr-x
ps2epsi	2.69 KB	-rwxr-xr-x
ps2pdf	272 B	-rwxr-xr-x
ps2pdf12	215 B	-rwxr-xr-x
ps2pdf13	215 B	-rwxr-xr-x
ps2pdf14	215 B	-rwxr-xr-x
ps2pdfwr	1.07 KB	-rwxr-xr-x
ps2ps	647 B	-rwxr-xr-x
ps2ps2	669 B	-rwxr-xr-x
ps_mem	17.69 KB	-rwxr-xr-x
psfaddtable	20.66 KB	-rwxr-xr-x
psfgettable	20.66 KB	-rwxr-xr-x
psfstriptable	20.66 KB	-rwxr-xr-x
psfxtable	20.66 KB	-rwxr-xr-x
pslog	12.48 KB	-rwxr-xr-x
pstree	33.53 KB	-rwxr-xr-x
pstree.x11	33.53 KB	-rwxr-xr-x
ptar	3.38 KB	-rwxr-xr-x
ptardiff	2.48 KB	-rwxr-xr-x
ptargrep	4.2 KB	-rwxr-xr-x
ptx	78 KB	-rwxr-xr-x
pure-pw	38.84 KB	-rwxr-xr-x
pure-pwconvert	10.72 KB	-rwxr-xr-x
pure-statsdecode	10.72 KB	-rwxr-xr-x
pwd	37.42 KB	-rwxr-xr-x
pwdx	12.68 KB	-rwxr-xr-x
pwmake	12.27 KB	-rwxr-xr-x
pwscore	12.27 KB	-rwxr-xr-x
pydoc-3	89 B	-rwxr-xr-x
pydoc3	89 B	-rwxr-xr-x
pydoc3.12	79 B	-rwxr-xr-x
pydoc3.6	89 B	-rwxr-xr-x
python-html2text	406 B	-rwxr-xr-x
python3	11.59 KB	-rwxr-xr-x
python3-config	204 B	-rwxr-xr-x
python3-html2text	406 B	-rwxr-xr-x
python3.12	7.57 KB	-rwxr-xr-x
python3.6	11.59 KB	-rwxr-xr-x
python3.6-config	204 B	-rwxr-xr-x
python3.6m	11.59 KB	-rwxr-xr-x
python3.6m-config	204 B	-rwxr-xr-x
python3.6m-x86_64-config	3.54 KB	-rwxr-xr-x
pyvenv-3	446 B	-rwxr-xr-x
pyvenv-3.6	446 B	-rwxr-xr-x
qemu-ga	505.49 KB	-rwxr-xr-x
quota	91.49 KB	-rwsr-xr-x
quotasync	74.69 KB	-rwxr-xr-x
ranlib	61.97 KB	-rwxr-xr-x
raw	16.5 KB	-rwxr-xr-x
read	28 B	-rwxr-xr-x
readelf	624.54 KB	-rwxr-xr-x
readlink	45.88 KB	-rwxr-xr-x
realpath	49.94 KB	-rwxr-xr-x
recode-sr-latin	17.99 KB	-rwxr-xr-x
rename	16.5 KB	-rwxr-xr-x
renew-dummy-cert	725 B	-rwxr-xr-x
renice	16.46 KB	-rwxr-xr-x
replace	3.54 MB	-rwxr-xr-x
repo-graph	3.62 KB	-rwxr-xr-x
repoclosure	3.62 KB	-rwxr-xr-x
repodiff	3.62 KB	-rwxr-xr-x
repomanage	3.62 KB	-rwxr-xr-x
repoquery	3.62 KB	-rwxr-xr-x
reposync	3.62 KB	-rwxr-xr-x
repotrack	3.62 KB	-rwxr-xr-x
rescan-scsi-bus.sh	38.24 KB	-rwxr-xr-x
reset	24.76 KB	-rwxr-xr-x
resizecons	20.77 KB	-rwxr-xr-x
resolve_stack_dump	3.56 MB	-rwxr-xr-x
resolvectl	195.75 KB	-rwxr-xr-x
resolveip	3.56 MB	-rwxr-xr-x
rev	12.46 KB	-rwxr-xr-x
rm	70.38 KB	-rwxr-xr-x
rmdir	45.46 KB	-rwxr-xr-x
rnano	247.94 KB	-rwxr-xr-x
rpcbind	61.55 KB	-rwxr-xr-x
rpcinfo	32.64 KB	-rwxr-xr-x
rpm	20.85 KB	-rwxr-xr-x
rpm2archive	20.46 KB	-rwxr-xr-x
rpm2cpio	11.84 KB	-rwxr-xr-x
rpmdb	16.96 KB	-rwxr-xr-x
rpmkeys	16.87 KB	-rwxr-xr-x
rpmquery	20.85 KB	-rwxr-xr-x
rpmverify	20.85 KB	-rwxr-xr-x
rsync	522.35 KB	-rwxr-xr-x
rsyslog-recover-qi.pl	5.96 KB	-rwxr-xr-x
run-parts	1.94 KB	-rwxr-xr-x
run-with-aspell	85 B	-rwxr-xr-x
runc	12.41 MB	-rwxr-xr-x
runcon	37.38 KB	-rwxr-xr-x
rvi	1.13 MB	-rwxr-xr-x
rview	1.13 MB	-rwxr-xr-x
rvim	2.93 MB	-rwxr-xr-x
sadf	334.57 KB	-rwxr-xr-x
sandbox	17.62 KB	-rwxr-xr-x
sar	135.77 KB	-rwxr-xr-x
sccmap	20.62 KB	-rwxr-xr-x
scl	36.87 KB	-rwxr-xr-x
scl_enabled	258 B	-rwxr-xr-x
scl_source	1.82 KB	-rwxr-xr-x
scp	102.84 KB	-rwxr-xr-x
screen	482.46 KB	-rwxr-sr-x
script	36.8 KB	-rwxr-xr-x
scriptreplay	29 KB	-rwxr-xr-x
scsi-rescan	38.24 KB	-rwxr-xr-x
scsi_logging_level	8.38 KB	-rwxr-xr-x
scsi_mandat	3.52 KB	-rwxr-xr-x
scsi_readcap	1.3 KB	-rwxr-xr-x
scsi_ready	1.09 KB	-rwxr-xr-x
scsi_satl	3.77 KB	-rwxr-xr-x
scsi_start	1.25 KB	-rwxr-xr-x
scsi_stop	1.44 KB	-rwxr-xr-x
scsi_temperature	936 B	-rwxr-xr-x
sdiff	105.33 KB	-rwxr-xr-x
secon	25.46 KB	-rwxr-xr-x
secret-tool	21.17 KB	-rwxr-xr-x
sed	115.27 KB	-rwxr-xr-x
sedismod	273.66 KB	-rwxr-xr-x
sedispol	198.48 KB	-rwxr-xr-x
semodule_expand	12.28 KB	-rwxr-xr-x
semodule_link	12.28 KB	-rwxr-xr-x
semodule_package	16.68 KB	-rwxr-xr-x
semodule_unpackage	12.3 KB	-rwxr-xr-x
seq	53.45 KB	-rwxr-xr-x
sessreg	17.38 KB	-rwxr-xr-x
setarch	20.76 KB	-rwxr-xr-x
setfacl	37.65 KB	-rwxr-xr-x
setfont	45.19 KB	-rwxr-xr-x
setkeycodes	12.56 KB	-rwxr-xr-x
setleds	16.6 KB	-rwxr-xr-x
setmetamode	12.56 KB	-rwxr-xr-x
setpriv	45.16 KB	-rwxr-xr-x
setsid	16.38 KB	-rwxr-xr-x
setterm	45.13 KB	-rwxr-xr-x
setup-nsssysinit	1.5 KB	-rwxr-xr-x
setup-nsssysinit.sh	1.5 KB	-rwxr-xr-x
setvtrgb	16.64 KB	-rwxr-xr-x
sfdp	12.26 KB	-rwxr-xr-x
sftp	159.74 KB	-rwxr-xr-x
sg	42.46 KB	-rwsr-xr-x
sg_bg_ctl	16.07 KB	-rwxr-xr-x
sg_compare_and_write	20.9 KB	-rwxr-xr-x
sg_copy_results	20.81 KB	-rwxr-xr-x
sg_dd	44.58 KB	-rwxr-xr-x
sg_decode_sense	20.33 KB	-rwxr-xr-x
sg_emc_trespass	12.26 KB	-rwxr-xr-x
sg_format	33.37 KB	-rwxr-xr-x
sg_get_config	33.31 KB	-rwxr-xr-x
sg_get_lba_status	20.46 KB	-rwxr-xr-x
sg_ident	16.17 KB	-rwxr-xr-x
sg_inq	117.91 KB	-rwxr-xr-x
sg_logs	150.02 KB	-rwxr-xr-x
sg_luns	24.85 KB	-rwxr-xr-x
sg_map	16.41 KB	-rwxr-xr-x
sg_map26	24.87 KB	-rwxr-xr-x
sg_modes	43.88 KB	-rwxr-xr-x
sg_opcodes	28.69 KB	-rwxr-xr-x
sg_persist	34.13 KB	-rwxr-xr-x
sg_prevent	12.07 KB	-rwxr-xr-x
sg_raw	24.38 KB	-rwxr-xr-x
sg_rbuf	20.84 KB	-rwxr-xr-x
sg_rdac	15.88 KB	-rwxr-xr-x
sg_read	24.41 KB	-rwxr-xr-x
sg_read_attr	34.79 KB	-rwxr-xr-x
sg_read_block_limits	12.12 KB	-rwxr-xr-x
sg_read_buffer	20.96 KB	-rwxr-xr-x
sg_read_long	16.27 KB	-rwxr-xr-x
sg_readcap	20.86 KB	-rwxr-xr-x
sg_reassign	16.22 KB	-rwxr-xr-x
sg_referrals	16.23 KB	-rwxr-xr-x
sg_rep_zones	20.66 KB	-rwxr-xr-x
sg_requests	16.3 KB	-rwxr-xr-x
sg_reset	16.73 KB	-rwxr-xr-x
sg_reset_wp	16.17 KB	-rwxr-xr-x
sg_rmsn	12.06 KB	-rwxr-xr-x
sg_rtpg	16.16 KB	-rwxr-xr-x
sg_safte	20.27 KB	-rwxr-xr-x
sg_sanitize	24.58 KB	-rwxr-xr-x
sg_sat_identify	16.71 KB	-rwxr-xr-x
sg_sat_phy_event	20.59 KB	-rwxr-xr-x
sg_sat_read_gplog	16.3 KB	-rwxr-xr-x
sg_sat_set_features	16.27 KB	-rwxr-xr-x
sg_scan	16.5 KB	-rwxr-xr-x
sg_seek	16.85 KB	-rwxr-xr-x
sg_senddiag	25.27 KB	-rwxr-xr-x
sg_ses	118.23 KB	-rwxr-xr-x
sg_ses_microcode	29.48 KB	-rwxr-xr-x
sg_start	20.93 KB	-rwxr-xr-x
sg_stpg	20.3 KB	-rwxr-xr-x
sg_stream_ctl	20.27 KB	-rwxr-xr-x
sg_sync	16.22 KB	-rwxr-xr-x
sg_test_rwbuf	20.73 KB	-rwxr-xr-x
sg_timestamp	20.74 KB	-rwxr-xr-x
sg_turs	16.74 KB	-rwxr-xr-x
sg_unmap	24.32 KB	-rwxr-xr-x
sg_verify	20.46 KB	-rwxr-xr-x
sg_vpd	108.75 KB	-rwxr-xr-x
sg_wr_mode	20.3 KB	-rwxr-xr-x
sg_write_buffer	21.24 KB	-rwxr-xr-x
sg_write_long	16.33 KB	-rwxr-xr-x
sg_write_same	24.48 KB	-rwxr-xr-x
sg_write_verify	20.78 KB	-rwxr-xr-x
sg_write_x	53.75 KB	-rwxr-xr-x
sg_xcopy	40.59 KB	-rwxr-xr-x
sg_zone	16.3 KB	-rwxr-xr-x
sginfo	74.85 KB	-rwxr-xr-x
sgm_dd	32.55 KB	-rwxr-xr-x
sgp_dd	36.95 KB	-rwxr-xr-x
sh	1.1 MB	-rwxr-xr-x
sha1hmac	32.66 KB	-rwxr-xr-x
sha1sum	45.55 KB	-rwxr-xr-x
sha224hmac	32.66 KB	-rwxr-xr-x
sha224sum	45.58 KB	-rwxr-xr-x
sha256hmac	32.66 KB	-rwxr-xr-x
sha256sum	45.58 KB	-rwxr-xr-x
sha384hmac	32.66 KB	-rwxr-xr-x
sha384sum	45.59 KB	-rwxr-xr-x
sha512hmac	32.66 KB	-rwxr-xr-x
sha512sum	45.59 KB	-rwxr-xr-x
shasum	9.66 KB	-rwxr-xr-x
showconsolefont	20.73 KB	-rwxr-xr-x
showkey	16.58 KB	-rwxr-xr-x
showrgb	13.05 KB	-rwxr-xr-x
shred	61.85 KB	-rwxr-xr-x
shuf	58.09 KB	-rwxr-xr-x
sieve-dump	35.03 KB	-rwxr-xr-x
sieve-filter	44.48 KB	-rwxr-xr-x
sieve-test	40.42 KB	-rwxr-xr-x
sievec	35.28 KB	-rwxr-xr-x
signver	114.79 KB	-rwxr-xr-x
sim_client	16.27 KB	-rwxr-xr-x
size	33.25 KB	-rwxr-xr-x
skill	28.8 KB	-rwxr-xr-x
slabinfo	36.15 KB	-rwxr-xr-x
slabtop	20.84 KB	-rwxr-xr-x
sleep	37.4 KB	-rwxr-xr-x
slencheck	12.29 KB	-rwxr-xr-x
slirp4netns	78.75 KB	-rwxr-xr-x
sm3hmac	32.66 KB	-rwxr-xr-x
snice	28.8 KB	-rwxr-xr-x
snmpconf	25.44 KB	-rwxr-xr-x
socat	406.49 KB	-rwxr-xr-x
soelim	42.55 KB	-rwxr-xr-x
sort	123.48 KB	-rwxr-xr-x
sotruss	4.18 KB	-rwxr-xr-x
source-highlight	84.3 KB	-rwxr-xr-x
source-highlight-esc.sh	1017 B	-rwxr-xr-x
source-highlight-settings	20.91 KB	-rwxr-xr-x
spell	122 B	-rwxr-xr-x
splain	18.7 KB	-rwxr-xr-x
split	58.05 KB	-rwxr-xr-x
sprof	28.67 KB	-rwxr-xr-x
sqlite3	1.28 MB	-rwxr-xr-x
src-hilite-lesspipe.sh	490 B	-rwxr-xr-x
ssh	757.61 KB	-rwxr-xr-x
ssh-add	346.13 KB	-rwxr-xr-x
ssh-agent	325.59 KB	-rwxr-xr-x
ssh-copy-id	10.44 KB	-rwxr-xr-x
ssh-keygen	427.17 KB	-rwxr-xr-x
ssh-keyscan	432.59 KB	-rwxr-xr-x
sshpass	20.48 KB	-rwxr-xr-x
ssltap	130.51 KB	-rwxr-xr-x
sss_ssh_authorizedkeys	28.78 KB	-rwxr-xr-x
sss_ssh_knownhostsproxy	28.78 KB	-rwxr-xr-x
stat	86.16 KB	-rwxr-xr-x
stdbuf	49.5 KB	-rwxr-xr-x
strace	1.94 MB	-rwxr-xr-x
strace-log-merge	1.78 KB	-rwxr-xr-x
stream	11.87 KB	-rwxr-xr-x
strings	37.43 KB	-rwxr-xr-x
strip	240.09 KB	-rwxr-xr-x
stty	77.61 KB	-rwxr-xr-x
su	48.99 KB	-rwsr-x---
sudo	186.52 KB	---s--x--x
sudoedit	186.52 KB	---s--x--x
sudoreplay	119.2 KB	---x--x--x
sum	45.53 KB	-rwxr-xr-x
sw-engine	20.12 MB	-rwxr-xr-x
switch_mod_lsapi	31.27 KB	-rwxr-xr-x
sxpm	28.81 KB	-rwxr-xr-x
sync	37.35 KB	-rwxr-xr-x
systemctl	218.45 KB	-rwxr-xr-x
systemd-analyze	1.56 MB	-rwxr-xr-x
systemd-ask-password	12.02 KB	-rwxr-xr-x
systemd-cat	16.03 KB	-rwxr-xr-x
systemd-cgls	16.44 KB	-rwxr-xr-x
systemd-cgtop	32.88 KB	-rwxr-xr-x
systemd-delta	24.45 KB	-rwxr-xr-x
systemd-detect-virt	11.88 KB	-rwxr-xr-x
systemd-escape	16.01 KB	-rwxr-xr-x
systemd-firstboot	36.98 KB	-rwxr-xr-x
systemd-hwdb	28.91 KB	-rwxr-xr-x
systemd-inhibit	16.03 KB	-rwxr-xr-x
systemd-machine-id-setup	24.75 KB	-rwxr-xr-x
systemd-mount	52.63 KB	-rwxr-xr-x
systemd-notify	16.03 KB	-rwxr-xr-x
systemd-nspawn	275.08 KB	-rwxr-xr-x
systemd-path	16.02 KB	-rwxr-xr-x
systemd-resolve	195.75 KB	-rwxr-xr-x
systemd-run	48.95 KB	-rwxr-xr-x
systemd-socket-activate	24.77 KB	-rwxr-xr-x
systemd-stdio-bridge	16.02 KB	-rwxr-xr-x
systemd-sysusers	53.05 KB	-rwxr-xr-x
systemd-tmpfiles	73.3 KB	-rwxr-xr-x
systemd-tty-ask-password-agent	32.82 KB	-rwxr-xr-x
systemd-umount	52.63 KB	-rwxr-xr-x
tabs	16.55 KB	-rwxr-xr-x
tac	41.49 KB	-rwxr-xr-x
tail	74.13 KB	-rwxr-xr-x
tapestat	41.32 KB	-rwxr-xr-x
tar	448.99 KB	-rwxr-xr-x
taskset	37.26 KB	-rwxr-xr-x
tbl	154.61 KB	-rwxr-xr-x
tcamgr	25.13 KB	-rwxr-xr-x
tcamttest	21.16 KB	-rwxr-xr-x
tcatest	57.6 KB	-rwxr-xr-x
tcbmgr	29.1 KB	-rwxr-xr-x
tcbmttest	53.22 KB	-rwxr-xr-x
tcbtest	69.56 KB	-rwxr-xr-x
tcfmgr	25.09 KB	-rwxr-xr-x
tcfmttest	37.2 KB	-rwxr-xr-x
tcftest	45.18 KB	-rwxr-xr-x
tchmgr	25.09 KB	-rwxr-xr-x
tchmttest	49.22 KB	-rwxr-xr-x
tchtest	57.53 KB	-rwxr-xr-x
tclsh	9.04 KB	-rwxr-xr-x
tclsh8.6	9.04 KB	-rwxr-xr-x
tcptraceroute	1.55 KB	-rwxr-xr-x
tctmgr	37.09 KB	-rwxr-xr-x
tctmttest	45.2 KB	-rwxr-xr-x
tcttest	57.19 KB	-rwxr-xr-x
tcucodec	37.08 KB	-rwxr-xr-x
tcumttest	25.16 KB	-rwxr-xr-x
tcutest	73.17 KB	-rwxr-xr-x
teamd	160.52 KB	-rwxr-xr-x
teamdctl	30.37 KB	-rwxr-xr-x
teamnl	20.47 KB	-rwxr-xr-x
tee	41.48 KB	-rwxr-xr-x
telnet	104.88 KB	-rwxr-xr-x
test	53.55 KB	-rwxr-xr-x
tic	85.31 KB	-rwxr-xr-x
timedatectl	36.96 KB	-rwxr-xr-x
timeout	41.85 KB	-rwxr-xr-x
tload	16.76 KB	-rwxr-xr-x
tmon	39.63 KB	-rwxr-xr-x
tmpwatch	35.47 KB	-rwxr-xr-x
toe	16.45 KB	-rwxr-xr-x
top	121.7 KB	-rwxr-xr-x
touch	93.94 KB	-rwxr-xr-x
tput	24.8 KB	-rwxr-xr-x
tr	49.63 KB	-rwxr-xr-x
tracepath	20.44 KB	-rwxr-xr-x
traceroute	70.97 KB	-rwxr-xr-x
traceroute6	70.97 KB	-rwxr-xr-x
tred	16.59 KB	-rwxr-xr-x
troff	805.02 KB	-rwxr-xr-x
true	33.33 KB	-rwxr-xr-x
truncate	41.36 KB	-rwxr-xr-x
trust	219.55 KB	-rwxr-xr-x
tset	24.76 KB	-rwxr-xr-x
tsort	41.49 KB	-rwxr-xr-x
tty	33.31 KB	-rwxr-xr-x
turbostat	130.8 KB	-rwxr-xr-x
twopi	12.26 KB	-rwxr-xr-x
type	28 B	-rwxr-xr-x
tzselect	15.01 KB	-rwxr-xr-x
uapi	3.35 MB	-rwxr-xr-x
ucs2any	24.41 KB	-rwxr-xr-x
udevadm	424.56 KB	-rwxr-xr-x
ul	20.59 KB	-rwxr-xr-x
ulimit	30 B	-rwxr-xr-x
umask	29 B	-rwxr-xr-x
umount	32.75 KB	-rwsr-xr-x
unalias	31 B	-rwxr-xr-x
uname	37.33 KB	-rwxr-xr-x
uname26	20.76 KB	-rwxr-xr-x
unexpand	45.61 KB	-rwxr-xr-x
unflatten	16.63 KB	-rwxr-xr-x
unicode_start	2.55 KB	-rwxr-xr-x
unicode_stop	363 B	-rwxr-xr-x
uniq	49.64 KB	-rwxr-xr-x
unlink	33.34 KB	-rwxr-xr-x
unlzma	82.09 KB	-rwxr-xr-x
unpigz	125.38 KB	-rwxr-xr-x
unshare	24.93 KB	-rwxr-xr-x
unversioned-python	157 B	-rwxr-xr-x
unxz	82.09 KB	-rwxr-xr-x
unzip	201.88 KB	-rwxr-xr-x
unzipsfx	101.48 KB	-rwxr-xr-x
update-ca-trust	1.24 KB	-rwxr-xr-x
update-crypto-policies	87 B	-rwxr-xr-x
update-gtk-immodules	313 B	-rwxr-xr-x
update-mime-database	57.22 KB	-rwxr-xr-x
updatedb	53.84 KB	-rwxr-xr-x
uptime	12.59 KB	-rwxr-xr-x
users	37.4 KB	-rwxr-xr-x
usleep	11.86 KB	-rwxr-xr-x
utmpdump	28.66 KB	-rwxr-xr-x
uuclient	15.88 KB	-rwxr-xr-x
uuidgen	16.38 KB	-rwxr-xr-x
uuidparse	37.13 KB	-rwxr-xr-x
vdir	139.91 KB	-rwxr-xr-x
vi	1.13 MB	-rwxr-xr-x
view	1.13 MB	-rwxr-xr-x
vim	2.93 MB	-rwxr-xr-x
vimdiff	2.93 MB	-rwxr-xr-x
vimdot	1.06 KB	-rwxr-xr-x
vimtutor	2.07 KB	-rwxr-xr-x
vlock	20.83 KB	-rwxr-xr-x
vmstat	36.79 KB	-rwxr-xr-x
w	20.75 KB	-rwxr-xr-x
wait	28 B	-rwxr-xr-x
wall	33.05 KB	-rwxr-xr-x
watch	29.19 KB	-rwxr-xr-x
watchgnupg	16.44 KB	-rwxr-xr-x
wc	49.64 KB	-rwxr-xr-x
wdctl	36.98 KB	-rwxr-xr-x
wget	521.43 KB	-rwxr-xr-x
whatis	54.04 KB	-rwxr-xr-x
whereis	29.27 KB	-rwxr-xr-x
which	29.38 KB	-rwxr-xr-x
whiptail	33.09 KB	-rwxr-xr-x
who	53.59 KB	-rwxr-xr-x
whoami	33.34 KB	-rwxr-xr-x
wmf2eps	17.15 KB	-rwxr-xr-x
wmf2fig	17.15 KB	-rwxr-xr-x
wmf2gd	17.14 KB	-rwxr-xr-x
wmf2svg	17.16 KB	-rwxr-xr-x
wmf2x	17.13 KB	-rwxr-xr-x
word-list-compress	11.99 KB	-rwxr-xr-x
write	20.62 KB	-rwxr-sr-x
wsrep_sst_backup	2.39 KB	-rwxr-xr-x
wsrep_sst_common	66.99 KB	-rw-r--r--
wsrep_sst_mariabackup	49.51 KB	-rwxr-xr-x
wsrep_sst_mysqldump	8.1 KB	-rwxr-xr-x
wsrep_sst_rsync	29.79 KB	-rwxr-xr-x
wsrep_sst_rsync_wan	29.79 KB	-rwxr-xr-x
x86_64	20.76 KB	-rwxr-xr-x
x86_64-redhat-linux-c++	1.21 MB	-rwxr-xr-x
x86_64-redhat-linux-g++	1.21 MB	-rwxr-xr-x
x86_64-redhat-linux-gcc	1.21 MB	-rwxr-xr-x
x86_64-redhat-linux-gcc-8	1.21 MB	-rwxr-xr-x
x86_64-redhat-linux-gnu-pkg-co...	424 B	-rwxr-xr-x
x86_energy_perf_policy	31.95 KB	-rwxr-xr-x
xargs	74.11 KB	-rwxr-xr-x
xgamma	17.08 KB	-rwxr-xr-x
xgettext	283.88 KB	-rwxr-xr-x
xhost	17.12 KB	-rwxr-xr-x
xinput	63.61 KB	-rwxr-xr-x
xkill	17.1 KB	-rwxr-xr-x
xml2-config	1.71 KB	-rwxr-xr-x
xmlcatalog	20.38 KB	-rwxr-xr-x
xmllint	73.37 KB	-rwxr-xr-x
xmlwf	36.97 KB	-rwxr-xr-x
xmodmap	39.98 KB	-rwxr-xr-x
xorg-x11-fonts-update-dirs	1.29 KB	-rwxr--r--
xrandr	65.46 KB	-rwxr-xr-x
xrdb	33.98 KB	-rwxr-xr-x
xrefresh	17.94 KB	-rwxr-xr-x
xset	37.2 KB	-rwxr-xr-x
xsetpointer	13.05 KB	-rwxr-xr-x
xsetroot	21.44 KB	-rwxr-xr-x
xslt-config	2.36 KB	-rwxr-xr-x
xsltproc	28.47 KB	-rwxr-xr-x
xstdcmap	17.68 KB	-rwxr-xr-x
xsubpp	4.96 KB	-rwxr-xr-x
xxd	20.53 KB	-rwxr-xr-x
xz	82.09 KB	-rwxr-xr-x
xzcat	82.09 KB	-rwxr-xr-x
xzcmp	6.48 KB	-rwxr-xr-x
xzdec	16.48 KB	-rwxr-xr-x
xzdiff	6.48 KB	-rwxr-xr-x
xzegrep	5.76 KB	-rwxr-xr-x
xzfgrep	5.76 KB	-rwxr-xr-x
xzgrep	5.76 KB	-rwxr-xr-x
xzless	1.76 KB	-rwxr-xr-x
xzmore	2.11 KB	-rwxr-xr-x
yat2m	33.34 KB	-rwxr-xr-x
yes	33.37 KB	-rwxr-xr-x
ypdomainname	21.16 KB	-rwxr-xr-x
yum	2.05 KB	-rwxr-xr-x
yum-builddep	3.62 KB	-rwxr-xr-x
yum-config-manager	3.62 KB	-rwxr-xr-x
yum-debug-dump	3.62 KB	-rwxr-xr-x
yum-debug-restore	3.62 KB	-rwxr-xr-x
yum-groups-manager	3.62 KB	-rwxr-xr-x
yumdownloader	3.62 KB	-rwxr-xr-x
zcat	1.94 KB	-rwxr-xr-x
zcmp	1.64 KB	-rwxr-xr-x
zdiff	5.74 KB	-rwxr-xr-x
zegrep	29 B	-rwxr-xr-x
zfgrep	29 B	-rwxr-xr-x
zforce	2.03 KB	-rwxr-xr-x
zgrep	7.4 KB	-rwxr-xr-x
zip	229 KB	-rwxr-xr-x
zipcloak	102.91 KB	-rwxr-xr-x
zipdetails	49.39 KB	-rwxr-xr-x
zipgrep	2.88 KB	-rwxr-xr-x
zipinfo	201.88 KB	-rwxr-xr-x
zipnote	97.76 KB	-rwxr-xr-x
zipsplit	97.76 KB	-rwxr-xr-x
zless	2.15 KB	-rwxr-xr-x
zmore	1.8 KB	-rwxr-xr-x
znew	4.45 KB	-rwxr-xr-x
zsoelim	42.55 KB	-rwxr-xr-x

Code Editor : libtoolize

#! /bin/sh
## DO NOT EDIT - This file generated from libtoolize
##               by inline-source v2014-01-03.01

# Prepare a package to use libtool.
# Written by Gary V. Vaughan <gary@gnu.org>, 2003

# Copyright (C) 2003-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions.  There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# Libtoolize is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# Libtoolize is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

## ------ ##
## Usage. ##
## ------ ##

# Run './libtoolize --help' for help with using this script from the
# command line.

## ------------------------------- ##
## User overridable command paths. ##
## ------------------------------- ##

# After configure completes, it has a better idea of some of the
# shell tools we need than the defaults used by the functions shared
# with bootstrap, so set those here where they can still be over-
# ridden by the user, but otherwise take precedence.

: ${AUTOCONF="autoconf"}
: ${AUTOMAKE="automake"}
: ${EGREP="/usr/bin/grep -E"}
: ${FGREP="/usr/bin/grep -F"}
: ${GREP="/usr/bin/grep"}
: ${LN_S="ln -s"}
: ${SED="/usr/bin/sed"}

## -------------------------- ##
## Source external libraries. ##
## -------------------------- ##

# Much of our low-level functionality needs to be sourced from external
# libraries, which are installed to $pkgauxdir under normal use, though
# we also need to be able to find them in $srcdir during testing, or if
# executed directly from the build tree.

# Set a version string for this script.
scriptversion=2015-01-20.17; # UTC

# General shell script boiler plate, and helper functions.
# Written by Gary V. Vaughan, 2004

# Copyright (C) 2004-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions.  There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.

# As a special exception to the GNU General Public License, if you distribute
# this file as part of a program or library that is built using GNU Libtool,
# you may include this file under the same distribution terms that you use
# for the rest of that program.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.

# Please report bugs or propose patches to gary@gnu.org.

## ------ ##
## Usage. ##
## ------ ##

# Evaluate this file near the top of your script to gain access to
# the functions and variables defined here:
#
#   . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
#
# If you need to override any of the default environment variable
# settings, do that before evaluating this file.

## -------------------- ##
## Shell normalisation. ##
## -------------------- ##

# Some shells need a little help to be as Bourne compatible as possible.
# Before doing anything else, make sure all that help has been provided!

DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
  emulate sh
  NULLCMD=:
  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
fi

# NLS nuisances: We save the old values in case they are required later.
_G_user_locale=
_G_safe_locale=
for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
  eval "if test set = \"\${$_G_var+set}\"; then
          save_$_G_var=\$$_G_var
          $_G_var=C
	  export $_G_var
	  _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
	  _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
	fi"
done

# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

# Make sure IFS has a sensible default
sp=' '
nl='
'
IFS="$sp	$nl"

# There are apparently some retarded systems that use ';' as a PATH separator!
if test "${PATH_SEPARATOR+set}" != set; then
  PATH_SEPARATOR=:
  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
      PATH_SEPARATOR=';'
  }
fi

## ------------------------- ##
## Locate command utilities. ##
## ------------------------- ##

# func_executable_p FILE
# ----------------------
# Check that FILE is an executable regular file.
func_executable_p ()
{
    test -f "$1" && test -x "$1"
}

# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
# --------------------------------------------
# Search for either a program that responds to --version with output
# containing "GNU", or else returned by CHECK_FUNC otherwise, by
# trying all the directories in PATH with each of the elements of
# PROGS_LIST.
#
# CHECK_FUNC should accept the path to a candidate program, and
# set $func_check_prog_result if it truncates its output less than
# $_G_path_prog_max characters.
func_path_progs ()
{
    _G_progs_list=$1
    _G_check_func=$2
    _G_PATH=${3-"$PATH"}

_G_path_prog_max=0
    _G_path_prog_found=false
    _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
    for _G_dir in $_G_PATH; do
      IFS=$_G_save_IFS
      test -z "$_G_dir" && _G_dir=.
      for _G_prog_name in $_G_progs_list; do
        for _exeext in '' .EXE; do
          _G_path_prog=$_G_dir/$_G_prog_name$_exeext
          func_executable_p "$_G_path_prog" || continue
          case `"$_G_path_prog" --version 2>&1` in
            *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
            *)     $_G_check_func $_G_path_prog
		   func_path_progs_result=$func_check_prog_result
		   ;;
          esac
          $_G_path_prog_found && break 3
        done
      done
    done
    IFS=$_G_save_IFS
    test -z "$func_path_progs_result" && {
      echo "no acceptable sed could be found in \$PATH" >&2
      exit 1
    }
}

# We want to be able to use the functions in this file before configure
# has figured out where the best binaries are kept, which means we have
# to search for them ourselves - except when the results are already set
# where we skip the searches.

# Unless the user overrides by setting SED, search the path for either GNU
# sed, or the sed that truncates its output the least.
test -z "$SED" && {
  _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
  for _G_i in 1 2 3 4 5 6 7; do
    _G_sed_script=$_G_sed_script$nl$_G_sed_script
  done
  echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
  _G_sed_script=

func_check_prog_sed ()
  {
    _G_path_prog=$1

_G_count=0
    printf 0123456789 >conftest.in
    while :
    do
      cat conftest.in conftest.in >conftest.tmp
      mv conftest.tmp conftest.in
      cp conftest.in conftest.nl
      echo '' >> conftest.nl
      "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
      diff conftest.out conftest.nl >/dev/null 2>&1 || break
      _G_count=`expr $_G_count + 1`
      if test "$_G_count" -gt "$_G_path_prog_max"; then
        # Best one so far, save it but keep looking for a better one
        func_check_prog_result=$_G_path_prog
        _G_path_prog_max=$_G_count
      fi
      # 10*(2^10) chars as input seems more than enough
      test 10 -lt "$_G_count" && break
    done
    rm -f conftest.in conftest.tmp conftest.nl conftest.out
  }

func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
  rm -f conftest.sed
  SED=$func_path_progs_result
}

# Unless the user overrides by setting GREP, search the path for either GNU
# grep, or the grep that truncates its output the least.
test -z "$GREP" && {
  func_check_prog_grep ()
  {
    _G_path_prog=$1

_G_count=0
    _G_path_prog_max=0
    printf 0123456789 >conftest.in
    while :
    do
      cat conftest.in conftest.in >conftest.tmp
      mv conftest.tmp conftest.in
      cp conftest.in conftest.nl
      echo 'GREP' >> conftest.nl
      "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
      diff conftest.out conftest.nl >/dev/null 2>&1 || break
      _G_count=`expr $_G_count + 1`
      if test "$_G_count" -gt "$_G_path_prog_max"; then
        # Best one so far, save it but keep looking for a better one
        func_check_prog_result=$_G_path_prog
        _G_path_prog_max=$_G_count
      fi
      # 10*(2^10) chars as input seems more than enough
      test 10 -lt "$_G_count" && break
    done
    rm -f conftest.in conftest.tmp conftest.nl conftest.out
  }

func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
  GREP=$func_path_progs_result
}

## ------------------------------- ##
## User overridable command paths. ##
## ------------------------------- ##

# All uppercase variable names are used for environment variables.  These
# variables can be overridden by the user before calling a script that
# uses them if a suitable command of that name is not already available
# in the command search PATH.

: ${CP="cp -f"}
: ${ECHO="printf %s\n"}
: ${EGREP="$GREP -E"}
: ${FGREP="$GREP -F"}
: ${LN_S="ln -s"}
: ${MAKE="make"}
: ${MKDIR="mkdir"}
: ${MV="mv -f"}
: ${RM="rm -f"}
: ${SHELL="${CONFIG_SHELL-/bin/sh}"}

## -------------------- ##
## Useful sed snippets. ##
## -------------------- ##

sed_dirname='s|/[^/]*$||'
sed_basename='s|^.*/||'

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
sed_quote_subst='s|$[`"$\\]$|\\\1|g'

# Same as above, but do not quote variable references.
sed_double_quote_subst='s/$["`\\]$/\\\1/g'

# Sed substitution that turns a string into a regex matching for the
# string literally.
sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'

# Sed substitution that converts a w32 file name or path
# that contains forward slashes, into one that contains
# (escaped) backslashes.  A very naive implementation.
sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'

# Re-'\' parameter expansions in output of sed_double_quote_subst that
# were '\'-ed in input to the same.  If an odd number of '\' preceded a
# '$' in input to sed_double_quote_subst, that '$' was protected from
# expansion.  Since each input '\' is now two '\'s, look for any number
# of runs of four '\'s followed by two '\'s and then a '$'.  '\' that '$'.
_G_bs='\\'
_G_bs2='\\\\'
_G_bs4='\\\\\\\\'
_G_dollar='\$'
sed_double_backslash="\
  s/$_G_bs4/&\\
/g
  s/^$_G_bs2$_G_dollar/$_G_bs&/
  s/\$[^$_G_bs]\$$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
  s/\n//g"

## ----------------- ##
## Global variables. ##
## ----------------- ##

# Except for the global variables explicitly listed below, the following
# functions in the '^func_' namespace, and the '^require_' namespace
# variables initialised in the 'Resource management' section, sourcing
# this file will not pollute your global namespace with anything
# else. There's no portable way to scope variables in Bourne shell
# though, so actually running these functions will sometimes place
# results into a variable named after the function, and often use
# temporary variables in the '^_G_' namespace. If you are careful to
# avoid using those namespaces casually in your sourcing script, things
# should continue to work as you expect. And, of course, you can freely
# overwrite any of the functions or variables defined here before
# calling anything to customize them.

EXIT_SUCCESS=0
EXIT_FAILURE=1
EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.

# Allow overriding, eg assuming that you follow the convention of
# putting '$debug_cmd' at the start of all your functions, you can get
# bash to show function call trace with:
#
#    debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
debug_cmd=${debug_cmd-":"}
exit_cmd=:

# By convention, finish your script with:
#
#    exit $exit_status
#
# so that you can set exit_status to non-zero if you want to indicate
# something went wrong during execution without actually bailing out at
# the point of failure.
exit_status=$EXIT_SUCCESS

# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
# positional parameter $0, within a function call, is the name of the
# function.
progpath=$0

# The name of this program.
progname=`$ECHO "$progpath" |$SED "$sed_basename"`

# Make sure we have an absolute progpath for reexecution:
case $progpath in
  [\\/]*|[A-Za-z]:\\*) ;;
  *[\\/]*)
     progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
     progdir=`cd "$progdir" && pwd`
     progpath=$progdir/$progname
     ;;
  *)
     _G_IFS=$IFS
     IFS=${PATH_SEPARATOR-:}
     for progdir in $PATH; do
       IFS=$_G_IFS
       test -x "$progdir/$progname" && break
     done
     IFS=$_G_IFS
     test -n "$progdir" || progdir=`pwd`
     progpath=$progdir/$progname
     ;;
esac

## ----------------- ##
## Standard options. ##
## ----------------- ##

# The following options affect the operation of the functions defined
# below, and should be set appropriately depending on run-time para-
# meters passed on the command line.

opt_dry_run=false
opt_quiet=false
opt_verbose=false

# Categories 'all' and 'none' are always available.  Append any others
# you will pass as the first argument to func_warning from your own
# code.
warning_categories=

# By default, display warnings according to 'opt_warning_types'.  Set
# 'warning_func'  to ':' to elide all warnings, or func_fatal_error to
# treat the next displayed warning as a fatal error.
warning_func=func_warn_and_continue

# Set to 'all' to display all warnings, 'none' to suppress all
# warnings, or a space delimited list of some subset of
# 'warning_categories' to display only the listed warnings.
opt_warning_types=all

## -------------------- ##
## Resource management. ##
## -------------------- ##

# This section contains definitions for functions that each ensure a
# particular resource (a file, or a non-empty configuration variable for
# example) is available, and if appropriate to extract default values
# from pertinent package files. Call them using their associated
# 'require_*' variable to ensure that they are executed, at most, once.
#
# It's entirely deliberate that calling these functions can set
# variables that don't obey the namespace limitations obeyed by the rest
# of this file, in order that that they be as useful as possible to
# callers.

# require_term_colors
# -------------------
# Allow display of bold text on terminals that support it.
require_term_colors=func_require_term_colors
func_require_term_colors ()
{
    $debug_cmd

test -t 1 && {
      # COLORTERM and USE_ANSI_COLORS environment variables take
      # precedence, because most terminfo databases neglect to describe
      # whether color sequences are supported.
      test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}

if test 1 = "$USE_ANSI_COLORS"; then
        # Standard ANSI escape sequences
        tc_reset='[0m'
        tc_bold='[1m';   tc_standout='[7m'
        tc_red='[31m';   tc_green='[32m'
        tc_blue='[34m';  tc_cyan='[36m'
      else
        # Otherwise trust the terminfo database after all.
        test -n "`tput sgr0 2>/dev/null`" && {
          tc_reset=`tput sgr0`
          test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
          tc_standout=$tc_bold
          test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
          test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
          test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
          test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
          test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
        }
      fi
    }

require_term_colors=:
}

## ----------------- ##
## Function library. ##
## ----------------- ##

# This section contains a variety of useful functions to call in your
# scripts. Take note of the portable wrappers for features provided by
# some modern shells, which will fall back to slower equivalents on
# less featureful shells.

# func_append VAR VALUE
# ---------------------
# Append VALUE onto the existing contents of VAR.

# We should try to minimise forks, especially on Windows where they are
  # unreasonably slow, so skip the feature probes when bash or zsh are
  # being used:
  if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
    : ${_G_HAVE_ARITH_OP="yes"}
    : ${_G_HAVE_XSI_OPS="yes"}
    # The += operator was introduced in bash 3.1
    case $BASH_VERSION in
      [12].* | 3.0 | 3.0*) ;;
      *)
        : ${_G_HAVE_PLUSEQ_OP="yes"}
        ;;
    esac
  fi

# _G_HAVE_PLUSEQ_OP
  # Can be empty, in which case the shell is probed, "yes" if += is
  # useable or anything else if it does not work.
  test -z "$_G_HAVE_PLUSEQ_OP" \
    && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
    && _G_HAVE_PLUSEQ_OP=yes

if test yes = "$_G_HAVE_PLUSEQ_OP"
then
  # This is an XSI compatible shell, allowing a faster implementation...
  eval 'func_append ()
  {
    $debug_cmd

eval "$1+=\$2"
  }'
else
  # ...otherwise fall back to using expr, which is often a shell builtin.
  func_append ()
  {
    $debug_cmd

eval "$1=\$$1\$2"
  }
fi

# func_append_quoted VAR VALUE
# ----------------------------
# Quote VALUE and append to the end of shell variable VAR, separated
# by a space.
if test yes = "$_G_HAVE_PLUSEQ_OP"; then
  eval 'func_append_quoted ()
  {
    $debug_cmd

func_quote_for_eval "$2"
    eval "$1+=\\ \$func_quote_for_eval_result"
  }'
else
  func_append_quoted ()
  {
    $debug_cmd

func_quote_for_eval "$2"
    eval "$1=\$$1\\ \$func_quote_for_eval_result"
  }
fi

# func_append_uniq VAR VALUE
# --------------------------
# Append unique VALUE onto the existing contents of VAR, assuming
# entries are delimited by the first character of VALUE.  For example:
#
#   func_append_uniq options " --another-option option-argument"
#
# will only append to $options if " --another-option option-argument "
# is not already present somewhere in $options already (note spaces at
# each end implied by leading space in second argument).
func_append_uniq ()
{
    $debug_cmd

eval _G_current_value='`$ECHO $'$1'`'
    _G_delim=`expr "$2" : '$.$'`

case $_G_delim$_G_current_value$_G_delim in
      *"$2$_G_delim"*) ;;
      *) func_append "$@" ;;
    esac
}

# func_arith TERM...
# ------------------
# Set func_arith_result to the result of evaluating TERMs.
  test -z "$_G_HAVE_ARITH_OP" \
    && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
    && _G_HAVE_ARITH_OP=yes

if test yes = "$_G_HAVE_ARITH_OP"; then
  eval 'func_arith ()
  {
    $debug_cmd

func_arith_result=$(( $* ))
  }'
else
  func_arith ()
  {
    $debug_cmd

func_arith_result=`expr "$@"`
  }
fi

# func_basename FILE
# ------------------
# Set func_basename_result to FILE with everything up to and including
# the last / stripped.
if test yes = "$_G_HAVE_XSI_OPS"; then
  # If this shell supports suffix pattern removal, then use it to avoid
  # forking. Hide the definitions single quotes in case the shell chokes
  # on unsupported syntax...
  _b='func_basename_result=${1##*/}'
  _d='case $1 in
        */*) func_dirname_result=${1%/*}$2 ;;
        *  ) func_dirname_result=$3        ;;
      esac'

else
  # ...otherwise fall back to using sed.
  _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
  _d='func_dirname_result=`$ECHO "$1"  |$SED "$sed_dirname"`
      if test "X$func_dirname_result" = "X$1"; then
        func_dirname_result=$3
      else
        func_append func_dirname_result "$2"
      fi'
fi

eval 'func_basename ()
{
    $debug_cmd

'"$_b"'
}'

# func_dirname FILE APPEND NONDIR_REPLACEMENT
# -------------------------------------------
# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
eval 'func_dirname ()
{
    $debug_cmd

'"$_d"'
}'

# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
# --------------------------------------------------------
# Perform func_basename and func_dirname in a single function
# call:
#   dirname:  Compute the dirname of FILE.  If nonempty,
#             add APPEND to the result, otherwise set result
#             to NONDIR_REPLACEMENT.
#             value returned in "$func_dirname_result"
#   basename: Compute filename of FILE.
#             value retuned in "$func_basename_result"
# For efficiency, we do not delegate to the functions above but instead
# duplicate the functionality here.
eval 'func_dirname_and_basename ()
{
    $debug_cmd

'"$_b"'
    '"$_d"'
}'

# func_echo ARG...
# ----------------
# Echo program name prefixed message.
func_echo ()
{
    $debug_cmd

_G_message=$*

func_echo_IFS=$IFS
    IFS=$nl
    for _G_line in $_G_message; do
      IFS=$func_echo_IFS
      $ECHO "$progname: $_G_line"
    done
    IFS=$func_echo_IFS
}

# func_echo_all ARG...
# --------------------
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
    $ECHO "$*"
}

# func_echo_infix_1 INFIX ARG...
# ------------------------------
# Echo program name, followed by INFIX on the first line, with any
# additional lines not showing INFIX.
func_echo_infix_1 ()
{
    $debug_cmd

$require_term_colors

_G_infix=$1; shift
    _G_indent=$_G_infix
    _G_prefix="$progname: $_G_infix: "
    _G_message=$*

# Strip color escape sequences before counting printable length
    for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
    do
      test -n "$_G_tc" && {
        _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
        _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
      }
    done
    _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`"  " ## exclude from sc_prohibit_nested_quotes

func_echo_infix_1_IFS=$IFS
    IFS=$nl
    for _G_line in $_G_message; do
      IFS=$func_echo_infix_1_IFS
      $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
      _G_prefix=$_G_indent
    done
    IFS=$func_echo_infix_1_IFS
}

# func_error ARG...
# -----------------
# Echo program name prefixed message to standard error.
func_error ()
{
    $debug_cmd

$require_term_colors

func_echo_infix_1 "  $tc_standout${tc_red}error$tc_reset" "$*" >&2
}

# func_fatal_error ARG...
# -----------------------
# Echo program name prefixed message to standard error, and exit.
func_fatal_error ()
{
    $debug_cmd

func_error "$*"
    exit $EXIT_FAILURE
}

# func_grep EXPRESSION FILENAME
# -----------------------------
# Check whether EXPRESSION matches any line of FILENAME, without output.
func_grep ()
{
    $debug_cmd

$GREP "$1" "$2" >/dev/null 2>&1
}

# func_len STRING
# ---------------
# Set func_len_result to the length of STRING. STRING may not
# start with a hyphen.
  test -z "$_G_HAVE_XSI_OPS" \
    && (eval 'x=a/b/c;
      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
    && _G_HAVE_XSI_OPS=yes

if test yes = "$_G_HAVE_XSI_OPS"; then
  eval 'func_len ()
  {
    $debug_cmd

func_len_result=${#1}
  }'
else
  func_len ()
  {
    $debug_cmd

func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
  }
fi

# func_mkdir_p DIRECTORY-PATH
# ---------------------------
# Make sure the entire path to DIRECTORY-PATH is available.
func_mkdir_p ()
{
    $debug_cmd

_G_directory_path=$1
    _G_dir_list=

if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then

# Protect directory names starting with '-'
      case $_G_directory_path in
        -*) _G_directory_path=./$_G_directory_path ;;
      esac

# While some portion of DIR does not yet exist...
      while test ! -d "$_G_directory_path"; do
        # ...make a list in topmost first order.  Use a colon delimited
	# list incase some portion of path contains whitespace.
        _G_dir_list=$_G_directory_path:$_G_dir_list

# If the last portion added has no slash in it, the list is done
        case $_G_directory_path in */*) ;; *) break ;; esac

# ...otherwise throw away the child directory and loop
        _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
      done
      _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`

func_mkdir_p_IFS=$IFS; IFS=:
      for _G_dir in $_G_dir_list; do
	IFS=$func_mkdir_p_IFS
        # mkdir can fail with a 'File exist' error if two processes
        # try to create one of the directories concurrently.  Don't
        # stop in that case!
        $MKDIR "$_G_dir" 2>/dev/null || :
      done
      IFS=$func_mkdir_p_IFS

# Bail out if we (or some other process) failed to create a directory.
      test -d "$_G_directory_path" || \
        func_fatal_error "Failed to create '$1'"
    fi
}

# func_mktempdir [BASENAME]
# -------------------------
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible.  If
# given, BASENAME is the basename for that directory.
func_mktempdir ()
{
    $debug_cmd

_G_template=${TMPDIR-/tmp}/${1-$progname}

if test : = "$opt_dry_run"; then
      # Return a directory name, but don't create it in dry-run mode
      _G_tmpdir=$_G_template-$$
    else

# If mktemp works, use that first and foremost
      _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`

if test ! -d "$_G_tmpdir"; then
        # Failing that, at least try and use $RANDOM to avoid a race
        _G_tmpdir=$_G_template-${RANDOM-0}$$

func_mktempdir_umask=`umask`
        umask 0077
        $MKDIR "$_G_tmpdir"
        umask $func_mktempdir_umask
      fi

# If we're not in dry-run mode, bomb out on failure
      test -d "$_G_tmpdir" || \
        func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
    fi

$ECHO "$_G_tmpdir"
}

# func_normal_abspath PATH
# ------------------------
# Remove doubled-up and trailing slashes, "." path components,
# and cancel out any ".." path components in PATH after making
# it an absolute path.
func_normal_abspath ()
{
    $debug_cmd

# These SED scripts presuppose an absolute path with a trailing slash.
    _G_pathcar='s|^/$[^/]*$.*$|\1|'
    _G_pathcdr='s|^/[^/]*||'
    _G_removedotparts=':dotsl
		s|/\./|/|g
		t dotsl
		s|/\.$|/|'
    _G_collapseslashes='s|/\{1,\}|/|g'
    _G_finalslash='s|/*$|/|'

# Start from root dir and reassemble the path.
    func_normal_abspath_result=
    func_normal_abspath_tpath=$1
    func_normal_abspath_altnamespace=
    case $func_normal_abspath_tpath in
      "")
        # Empty path, that just means $cwd.
        func_stripname '' '/' "`pwd`"
        func_normal_abspath_result=$func_stripname_result
        return
        ;;
      # The next three entries are used to spot a run of precisely
      # two leading slashes without using negated character classes;
      # we take advantage of case's first-match behaviour.
      ///*)
        # Unusual form of absolute path, do nothing.
        ;;
      //*)
        # Not necessarily an ordinary path; POSIX reserves leading '//'
        # and for example Cygwin uses it to access remote file shares
        # over CIFS/SMB, so we conserve a leading double slash if found.
        func_normal_abspath_altnamespace=/
        ;;
      /*)
        # Absolute path, do nothing.
        ;;
      *)
        # Relative path, prepend $cwd.
        func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
        ;;
    esac

# Cancel out all the simple stuff to save iterations.  We also want
    # the path to end with a slash for ease of parsing, so make sure
    # there is one (and only one) here.
    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
          -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
    while :; do
      # Processed it all yet?
      if test / = "$func_normal_abspath_tpath"; then
        # If we ascended to the root using ".." the result may be empty now.
        if test -z "$func_normal_abspath_result"; then
          func_normal_abspath_result=/
        fi
        break
      fi
      func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
          -e "$_G_pathcar"`
      func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
          -e "$_G_pathcdr"`
      # Figure out what to do with it
      case $func_normal_abspath_tcomponent in
        "")
          # Trailing empty path component, ignore it.
          ;;
        ..)
          # Parent dir; strip last assembled component from result.
          func_dirname "$func_normal_abspath_result"
          func_normal_abspath_result=$func_dirname_result
          ;;
        *)
          # Actual path component, append it.
          func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
          ;;
      esac
    done
    # Restore leading double-slash if one was found on entry.
    func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
}

# func_notquiet ARG...
# --------------------
# Echo program name prefixed message only when not in quiet mode.
func_notquiet ()
{
    $debug_cmd

$opt_quiet || func_echo ${1+"$@"}

# A bug in bash halts the script if the last line of a function
    # fails when set -e is in force, so we need another command to
    # work around that:
    :
}

# func_relative_path SRCDIR DSTDIR
# --------------------------------
# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
func_relative_path ()
{
    $debug_cmd

func_relative_path_result=
    func_normal_abspath "$1"
    func_relative_path_tlibdir=$func_normal_abspath_result
    func_normal_abspath "$2"
    func_relative_path_tbindir=$func_normal_abspath_result

# Ascend the tree starting from libdir
    while :; do
      # check if we have found a prefix of bindir
      case $func_relative_path_tbindir in
        $func_relative_path_tlibdir)
          # found an exact match
          func_relative_path_tcancelled=
          break
          ;;
        $func_relative_path_tlibdir*)
          # found a matching prefix
          func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
          func_relative_path_tcancelled=$func_stripname_result
          if test -z "$func_relative_path_result"; then
            func_relative_path_result=.
          fi
          break
          ;;
        *)
          func_dirname $func_relative_path_tlibdir
          func_relative_path_tlibdir=$func_dirname_result
          if test -z "$func_relative_path_tlibdir"; then
            # Have to descend all the way to the root!
            func_relative_path_result=../$func_relative_path_result
            func_relative_path_tcancelled=$func_relative_path_tbindir
            break
          fi
          func_relative_path_result=../$func_relative_path_result
          ;;
      esac
    done

# Now calculate path; take care to avoid doubling-up slashes.
    func_stripname '' '/' "$func_relative_path_result"
    func_relative_path_result=$func_stripname_result
    func_stripname '/' '/' "$func_relative_path_tcancelled"
    if test -n "$func_stripname_result"; then
      func_append func_relative_path_result "/$func_stripname_result"
    fi

# Normalisation. If bindir is libdir, return '.' else relative path.
    if test -n "$func_relative_path_result"; then
      func_stripname './' '' "$func_relative_path_result"
      func_relative_path_result=$func_stripname_result
    fi

test -n "$func_relative_path_result" || func_relative_path_result=.

:
}

# func_quote_for_eval ARG...
# --------------------------
# Aesthetically quote ARGs to be evaled later.
# This function returns two values:
#   i) func_quote_for_eval_result
#      double-quoted, suitable for a subsequent eval
#  ii) func_quote_for_eval_unquoted_result
#      has all characters that are still active within double
#      quotes backslashified.
func_quote_for_eval ()
{
    $debug_cmd

func_quote_for_eval_unquoted_result=
    func_quote_for_eval_result=
    while test 0 -lt $#; do
      case $1 in
        *[\\\`\"\$]*)
	  _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
        *)
          _G_unquoted_arg=$1 ;;
      esac
      if test -n "$func_quote_for_eval_unquoted_result"; then
	func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
      else
        func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
      fi

case $_G_unquoted_arg in
        # Double-quote args containing shell metacharacters to delay
        # word splitting, command substitution and variable expansion
        # for a subsequent eval.
        # Many Bourne shells cannot handle close brackets correctly
        # in scan sets, so we specify it separately.
        *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
          _G_quoted_arg=\"$_G_unquoted_arg\"
          ;;
        *)
          _G_quoted_arg=$_G_unquoted_arg
	  ;;
      esac

if test -n "$func_quote_for_eval_result"; then
	func_append func_quote_for_eval_result " $_G_quoted_arg"
      else
        func_append func_quote_for_eval_result "$_G_quoted_arg"
      fi
      shift
    done
}

# func_quote_for_expand ARG
# -------------------------
# Aesthetically quote ARG to be evaled later; same as above,
# but do not quote variable references.
func_quote_for_expand ()
{
    $debug_cmd

case $1 in
      *[\\\`\"]*)
	_G_arg=`$ECHO "$1" | $SED \
	    -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
      *)
        _G_arg=$1 ;;
    esac

case $_G_arg in
      # Double-quote args containing shell metacharacters to delay
      # word splitting and command substitution for a subsequent eval.
      # Many Bourne shells cannot handle close brackets correctly
      # in scan sets, so we specify it separately.
      *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
        _G_arg=\"$_G_arg\"
        ;;
    esac

func_quote_for_expand_result=$_G_arg
}

# func_stripname PREFIX SUFFIX NAME
# ---------------------------------
# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
if test yes = "$_G_HAVE_XSI_OPS"; then
  eval 'func_stripname ()
  {
    $debug_cmd

# pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
    # positional parameters, so assign one to ordinary variable first.
    func_stripname_result=$3
    func_stripname_result=${func_stripname_result#"$1"}
    func_stripname_result=${func_stripname_result%"$2"}
  }'
else
  func_stripname ()
  {
    $debug_cmd

case $2 in
      .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
      *)  func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
    esac
  }
fi

# func_show_eval CMD [FAIL_EXP]
# -----------------------------
# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it.
func_show_eval ()
{
    $debug_cmd

_G_cmd=$1
    _G_fail_exp=${2-':'}

func_quote_for_expand "$_G_cmd"
    eval "func_notquiet $func_quote_for_expand_result"

$opt_dry_run || {
      eval "$_G_cmd"
      _G_status=$?
      if test 0 -ne "$_G_status"; then
	eval "(exit $_G_status); $_G_fail_exp"
      fi
    }
}

# func_show_eval_locale CMD [FAIL_EXP]
# ------------------------------------
# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it.  Use the saved locale for evaluation.
func_show_eval_locale ()
{
    $debug_cmd

_G_cmd=$1
    _G_fail_exp=${2-':'}

$opt_quiet || {
      func_quote_for_expand "$_G_cmd"
      eval "func_echo $func_quote_for_expand_result"
    }

$opt_dry_run || {
      eval "$_G_user_locale
	    $_G_cmd"
      _G_status=$?
      eval "$_G_safe_locale"
      if test 0 -ne "$_G_status"; then
	eval "(exit $_G_status); $_G_fail_exp"
      fi
    }
}

# func_tr_sh
# ----------
# Turn $1 into a string suitable for a shell variable name.
# Result is stored in $func_tr_sh_result.  All characters
# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
# if $1 begins with a digit, a '_' is prepended as well.
func_tr_sh ()
{
    $debug_cmd

case $1 in
    [0-9]* | *[!a-zA-Z0-9_]*)
      func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^$[0-9]$/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
      ;;
    * )
      func_tr_sh_result=$1
      ;;
    esac
}

# func_verbose ARG...
# -------------------
# Echo program name prefixed message in verbose mode only.
func_verbose ()
{
    $debug_cmd

$opt_verbose && func_echo "$*"

:
}

# func_warn_and_continue ARG...
# -----------------------------
# Echo program name prefixed warning message to standard error.
func_warn_and_continue ()
{
    $debug_cmd

$require_term_colors

func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
}

# func_warning CATEGORY ARG...
# ----------------------------
# Echo program name prefixed warning message to standard error. Warning
# messages can be filtered according to CATEGORY, where this function
# elides messages where CATEGORY is not listed in the global variable
# 'opt_warning_types'.
func_warning ()
{
    $debug_cmd

# CATEGORY must be in the warning_categories list!
    case " $warning_categories " in
      *" $1 "*) ;;
      *) func_internal_error "invalid warning category '$1'" ;;
    esac

_G_category=$1
    shift

case " $opt_warning_types " in
      *" $_G_category "*) $warning_func ${1+"$@"} ;;
    esac
}

# func_sort_ver VER1 VER2
# -----------------------
# 'sort -V' is not generally available.
# Note this deviates from the version comparison in automake
# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
# but this should suffice as we won't be specifying old
# version formats or redundant trailing .0 in bootstrap.conf.
# If we did want full compatibility then we should probably
# use m4_version_compare from autoconf.
func_sort_ver ()
{
    $debug_cmd

printf '%s\n%s\n' "$1" "$2" \
      | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
}

# func_lt_ver PREV CURR
# ---------------------
# Return true if PREV and CURR are in the correct order according to
# func_sort_ver, otherwise false.  Use it like this:
#
#  func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
func_lt_ver ()
{
    $debug_cmd

test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
}

# Local variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
# time-stamp-time-zone: "UTC"
# End:
#! /bin/sh

# Set a version string for this script.
scriptversion=2014-01-07.03; # UTC

# A portable, pluggable option parser for Bourne shell.
# Written by Gary V. Vaughan, 2010

# Copyright (C) 2010-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions.  There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Please report bugs or propose patches to gary@gnu.org.

## ------ ##
## Usage. ##
## ------ ##

# This file is a library for parsing options in your shell scripts along
# with assorted other useful supporting features that you can make use
# of too.
#
# For the simplest scripts you might need only:
#
#   #!/bin/sh
#   . relative/path/to/funclib.sh
#   . relative/path/to/options-parser
#   scriptversion=1.0
#   func_options ${1+"$@"}
#   eval set dummy "$func_options_result"; shift
#   ...rest of your script...
#
# In order for the '--version' option to work, you will need to have a
# suitably formatted comment like the one at the top of this file
# starting with '# Written by ' and ending with '# warranty; '.
#
# For '-h' and '--help' to work, you will also need a one line
# description of your script's purpose in a comment directly above the
# '# Written by ' line, like the one at the top of this file.
#
# The default options also support '--debug', which will turn on shell
# execution tracing (see the comment above debug_cmd below for another
# use), and '--verbose' and the func_verbose function to allow your script
# to display verbose messages only when your user has specified
# '--verbose'.
#
# After sourcing this file, you can plug processing for additional
# options by amending the variables from the 'Configuration' section
# below, and following the instructions in the 'Option parsing'
# section further down.

## -------------- ##
## Configuration. ##
## -------------- ##

# You should override these variables in your script after sourcing this
# file so that they reflect the customisations you have added to the
# option parser.

# The usage line for option parsing errors and the start of '-h' and
# '--help' output messages. You can embed shell variables for delayed
# expansion at the time the message is displayed, but you will need to
# quote other shell meta-characters carefully to prevent them being
# expanded when the contents are evaled.
usage='$progpath [OPTION]...'

# Short help message in response to '-h' and '--help'.  Add to this or
# override it after sourcing this library to reflect the full set of
# options your script accepts.
usage_message="\
       --debug        enable verbose shell tracing
   -W, --warnings=CATEGORY
                      report the warnings falling in CATEGORY [all]
   -v, --verbose      verbosely report processing
       --version      print version information and exit
   -h, --help         print short or long help message and exit
"

# Additional text appended to 'usage_message' in response to '--help'.
long_help_message="
Warning categories include:
       'all'          show all warnings
       'none'         turn off all the warnings
       'error'        warnings are treated as fatal errors"

# Help message printed before fatal option parsing errors.
fatal_help="Try '\$progname --help' for more information."

## ------------------------- ##
## Hook function management. ##
## ------------------------- ##

# This section contains functions for adding, removing, and running hooks
# to the main code.  A hook is just a named list of of function, that can
# be run in order later on.

# func_hookable FUNC_NAME
# -----------------------
# Declare that FUNC_NAME will run hooks added with
# 'func_add_hook FUNC_NAME ...'.
func_hookable ()
{
    $debug_cmd

func_append hookable_fns " $1"
}

# func_add_hook FUNC_NAME HOOK_FUNC
# ---------------------------------
# Request that FUNC_NAME call HOOK_FUNC before it returns.  FUNC_NAME must
# first have been declared "hookable" by a call to 'func_hookable'.
func_add_hook ()
{
    $debug_cmd

case " $hookable_fns " in
      *" $1 "*) ;;
      *) func_fatal_error "'$1' does not accept hook functions." ;;
    esac

eval func_append ${1}_hooks '" $2"'
}

# func_remove_hook FUNC_NAME HOOK_FUNC
# ------------------------------------
# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
func_remove_hook ()
{
    $debug_cmd

eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
}

# func_run_hooks FUNC_NAME [ARG]...
# ---------------------------------
# Run all hook functions registered to FUNC_NAME.
# It is assumed that the list of hook functions contains nothing more
# than a whitespace-delimited list of legal shell function names, and
# no effort is wasted trying to catch shell meta-characters or preserve
# whitespace.
func_run_hooks ()
{
    $debug_cmd

case " $hookable_fns " in
      *" $1 "*) ;;
      *) func_fatal_error "'$1' does not support hook funcions.n" ;;
    esac

eval _G_hook_fns=\$$1_hooks; shift

for _G_hook in $_G_hook_fns; do
      eval $_G_hook '"$@"'

# store returned options list back into positional
      # parameters for next 'cmd' execution.
      eval _G_hook_result=\$${_G_hook}_result
      eval set dummy "$_G_hook_result"; shift
    done

func_quote_for_eval ${1+"$@"}
    func_run_hooks_result=$func_quote_for_eval_result
}

## --------------- ##
## Option parsing. ##
## --------------- ##

# In order to add your own option parsing hooks, you must accept the
# full positional parameter list in your hook function, remove any
# options that you action, and then pass back the remaining unprocessed
# options in '<hooked_function_name>_result', escaped suitably for
# 'eval'.  Like this:
#
#    my_options_prep ()
#    {
#        $debug_cmd
#
#        # Extend the existing usage message.
#        usage_message=$usage_message'
#      -s, --silent       don'\''t print informational messages
#    '
#
#        func_quote_for_eval ${1+"$@"}
#        my_options_prep_result=$func_quote_for_eval_result
#    }
#    func_add_hook func_options_prep my_options_prep
#
#
#    my_silent_option ()
#    {
#        $debug_cmd
#
#        # Note that for efficiency, we parse as many options as we can
#        # recognise in a loop before passing the remainder back to the
#        # caller on the first unrecognised argument we encounter.
#        while test $# -gt 0; do
#          opt=$1; shift
#          case $opt in
#            --silent|-s) opt_silent=: ;;
#            # Separate non-argument short options:
#            -s*)         func_split_short_opt "$_G_opt"
#                         set dummy "$func_split_short_opt_name" \
#                             "-$func_split_short_opt_arg" ${1+"$@"}
#                         shift
#                         ;;
#            *)            set dummy "$_G_opt" "$*"; shift; break ;;
#          esac
#        done
#
#        func_quote_for_eval ${1+"$@"}
#        my_silent_option_result=$func_quote_for_eval_result
#    }
#    func_add_hook func_parse_options my_silent_option
#
#
#    my_option_validation ()
#    {
#        $debug_cmd
#
#        $opt_silent && $opt_verbose && func_fatal_help "\
#    '--silent' and '--verbose' options are mutually exclusive."
#
#        func_quote_for_eval ${1+"$@"}
#        my_option_validation_result=$func_quote_for_eval_result
#    }
#    func_add_hook func_validate_options my_option_validation
#
# You'll alse need to manually amend $usage_message to reflect the extra
# options you parse.  It's preferable to append if you can, so that
# multiple option parsing hooks can be added safely.

# func_options [ARG]...
# ---------------------
# All the functions called inside func_options are hookable. See the
# individual implementations for details.
func_hookable func_options
func_options ()
{
    $debug_cmd

func_options_prep ${1+"$@"}
    eval func_parse_options \
        ${func_options_prep_result+"$func_options_prep_result"}
    eval func_validate_options \
        ${func_parse_options_result+"$func_parse_options_result"}

eval func_run_hooks func_options \
        ${func_validate_options_result+"$func_validate_options_result"}

# save modified positional parameters for caller
    func_options_result=$func_run_hooks_result
}

# func_options_prep [ARG]...
# --------------------------
# All initialisations required before starting the option parse loop.
# Note that when calling hook functions, we pass through the list of
# positional parameters.  If a hook function modifies that list, and
# needs to propogate that back to rest of this script, then the complete
# modified list must be put in 'func_run_hooks_result' before
# returning.
func_hookable func_options_prep
func_options_prep ()
{
    $debug_cmd

# Option defaults:
    opt_verbose=false
    opt_warning_types=

func_run_hooks func_options_prep ${1+"$@"}

# save modified positional parameters for caller
    func_options_prep_result=$func_run_hooks_result
}

# func_parse_options [ARG]...
# ---------------------------
# The main option parsing loop.
func_hookable func_parse_options
func_parse_options ()
{
    $debug_cmd

func_parse_options_result=

# this just eases exit handling
    while test $# -gt 0; do
      # Defer to hook functions for initial option parsing, so they
      # get priority in the event of reusing an option name.
      func_run_hooks func_parse_options ${1+"$@"}

# Adjust func_parse_options positional parameters to match
      eval set dummy "$func_run_hooks_result"; shift

# Break out of the loop if we already parsed every option.
      test $# -gt 0 || break

_G_opt=$1
      shift
      case $_G_opt in
        --debug|-x)   debug_cmd='set -x'
                      func_echo "enabling shell trace mode"
                      $debug_cmd
                      ;;

--no-warnings|--no-warning|--no-warn)
                      set dummy --warnings none ${1+"$@"}
                      shift
		      ;;

--warnings|--warning|-W)
                      test $# = 0 && func_missing_arg $_G_opt && break
                      case " $warning_categories $1" in
                        *" $1 "*)
                          # trailing space prevents matching last $1 above
                          func_append_uniq opt_warning_types " $1"
                          ;;
                        *all)
                          opt_warning_types=$warning_categories
                          ;;
                        *none)
                          opt_warning_types=none
                          warning_func=:
                          ;;
                        *error)
                          opt_warning_types=$warning_categories
                          warning_func=func_fatal_error
                          ;;
                        *)
                          func_fatal_error \
                             "unsupported warning category: '$1'"
                          ;;
                      esac
                      shift
                      ;;

--verbose|-v) opt_verbose=: ;;
        --version)    func_version ;;
        -\?|-h)       func_usage ;;
        --help)       func_help ;;

# Separate optargs to long options (plugins may need this):
	--*=*)        func_split_equals "$_G_opt"
	              set dummy "$func_split_equals_lhs" \
                          "$func_split_equals_rhs" ${1+"$@"}
                      shift
                      ;;

# Separate optargs to short options:
        -W*)
                      func_split_short_opt "$_G_opt"
                      set dummy "$func_split_short_opt_name" \
                          "$func_split_short_opt_arg" ${1+"$@"}
                      shift
                      ;;

# Separate non-argument short options:
        -\?*|-h*|-v*|-x*)
                      func_split_short_opt "$_G_opt"
                      set dummy "$func_split_short_opt_name" \
                          "-$func_split_short_opt_arg" ${1+"$@"}
                      shift
                      ;;

--)           break ;;
        -*)           func_fatal_help "unrecognised option: '$_G_opt'" ;;
        *)            set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
      esac
    done

# save modified positional parameters for caller
    func_quote_for_eval ${1+"$@"}
    func_parse_options_result=$func_quote_for_eval_result
}

# func_validate_options [ARG]...
# ------------------------------
# Perform any sanity checks on option settings and/or unconsumed
# arguments.
func_hookable func_validate_options
func_validate_options ()
{
    $debug_cmd

# Display all warnings if -W was not given.
    test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"

func_run_hooks func_validate_options ${1+"$@"}

# Bail if the options were screwed!
    $exit_cmd $EXIT_FAILURE

# save modified positional parameters for caller
    func_validate_options_result=$func_run_hooks_result
}

## ----------------- ##
## Helper functions. ##
## ----------------- ##

# This section contains the helper functions used by the rest of the
# hookable option parser framework in ascii-betical order.

# func_fatal_help ARG...
# ----------------------
# Echo program name prefixed message to standard error, followed by
# a help hint, and exit.
func_fatal_help ()
{
    $debug_cmd

eval \$ECHO \""Usage: $usage"\"
    eval \$ECHO \""$fatal_help"\"
    func_error ${1+"$@"}
    exit $EXIT_FAILURE
}

# func_help
# ---------
# Echo long help message to standard output and exit.
func_help ()
{
    $debug_cmd

func_usage_message
    $ECHO "$long_help_message"
    exit 0
}

# func_missing_arg ARGNAME
# ------------------------
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
    $debug_cmd

func_error "Missing argument for '$1'."
    exit_cmd=exit
}

# func_split_equals STRING
# ------------------------
# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
# splitting STRING at the '=' sign.
test -z "$_G_HAVE_XSI_OPS" \
    && (eval 'x=a/b/c;
      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
    && _G_HAVE_XSI_OPS=yes

if test yes = "$_G_HAVE_XSI_OPS"
then
  # This is an XSI compatible shell, allowing a faster implementation...
  eval 'func_split_equals ()
  {
      $debug_cmd

func_split_equals_lhs=${1%%=*}
      func_split_equals_rhs=${1#*=}
      test "x$func_split_equals_lhs" = "x$1" \
        && func_split_equals_rhs=
  }'
else
  # ...otherwise fall back to using expr, which is often a shell builtin.
  func_split_equals ()
  {
      $debug_cmd

func_split_equals_lhs=`expr "x$1" : 'x$[^=]*$'`
      func_split_equals_rhs=
      test "x$func_split_equals_lhs" = "x$1" \
        || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=$.*$$'`
  }
fi #func_split_equals

# func_split_short_opt SHORTOPT
# -----------------------------
# Set func_split_short_opt_name and func_split_short_opt_arg shell
# variables after splitting SHORTOPT after the 2nd character.
if test yes = "$_G_HAVE_XSI_OPS"
then
  # This is an XSI compatible shell, allowing a faster implementation...
  eval 'func_split_short_opt ()
  {
      $debug_cmd

func_split_short_opt_arg=${1#??}
      func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
  }'
else
  # ...otherwise fall back to using expr, which is often a shell builtin.
  func_split_short_opt ()
  {
      $debug_cmd

func_split_short_opt_name=`expr "x$1" : 'x-$.$'`
      func_split_short_opt_arg=`expr "x$1" : 'x-.$.*$$'`
  }
fi #func_split_short_opt

# func_usage
# ----------
# Echo short help message to standard output and exit.
func_usage ()
{
    $debug_cmd

func_usage_message
    $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
    exit 0
}

# func_usage_message
# ------------------
# Echo short help message to standard output.
func_usage_message ()
{
    $debug_cmd

eval \$ECHO \""Usage: $usage"\"
    echo
    $SED -n 's|^# ||
        /^Written by/{
          x;p;x
        }
	h
	/^Written by/q' < "$progpath"
    echo
    eval \$ECHO \""$usage_message"\"
}

# func_version
# ------------
# Echo version message to standard output and exit.
func_version ()
{
    $debug_cmd

printf '%s\n' "$progname $scriptversion"
    $SED -n '
        /(C)/!b go
        :more
        /\./!{
          N
          s|\n# | |
          b more
        }
        :go
        /^# Written by /,/# warranty; / {
          s|^# ||
          s|^# *$||
          s|$(C)$[ 0-9,-]*[ ,-]$[1-9][0-9]* $|\1 \2|
          p
        }
        /^# Written by / {
          s|^# ||
          p
        }
        /^warranty; /q' < "$progpath"

exit $?
}

# Extract macro arguments from autotools input with GNU M4.
# Written by Gary V. Vaughan, 2010
#
# Copyright (C) 2010-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions.  There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# Make sure we've evaluated scripts we depend on.
test -z "$progpath" && . `echo "$0" |${SED-sed} 's|[^/]*$||'`/funclib.sh
test extract-trace = "$progname" && . `echo "$0" |${SED-sed} 's|[^/]*$||'`/options-parser

# Set a version string.
scriptversion=2015-01-20.17; # UTC

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Please report bugs or propose patches to gary@gnu.org.

## ------ ##
## Usage. ##
## ------ ##

# Run './extract-trace --help' for help with using this script from the
# command line.
#
# Or source first 'options-parser' and then this file into your own
# scripts in order to make use of the function and variable framework
# they define, and also to avoid the overhead of forking to run this
# script in its own process on every call.

## ----------------- ##
## Helper functions. ##
## ----------------- ##

# This section contains the helper functions used by the rest of
# 'extract-trace'.

# func_autoconf_configure MAYBE-CONFIGURE-FILE
# --------------------------------------------
# Ensure that MAYBE-CONFIGURE-FILE is the name of a file in the current
# directory that contains an uncommented call to AC_INIT.
func_autoconf_configure ()
{
    $debug_cmd

_G_sed_no_comment='
      s|#.*$||
      s|^dnl .*$||
      s| dnl .*$||'
    _G_ac_init=

# If we were passed a genuine file, make sure it calls AC_INIT.
    test -f "$1" \
      && _G_ac_init=`$SED "$_G_sed_no_comment" "$1" |$GREP AC_INIT`

# Otherwise it is not a genuine Autoconf input file.
    test -n "$_G_ac_init"
    _G_status=$?

test 0 -ne "$_G_status" \
      && func_verbose "'$1' not using Autoconf"

(exit $_G_status)
}

# func_tool_version_output CMD [FATAL-ERROR-MSG]
# ----------------------------------------------
# Attempt to run 'CMD --version', discarding errors.  The output can be
# ignored by redirecting stdout, and this function used simply to test
# whether the command exists and exits normally when passed a
# '--version' argument.
# When FATAL-ERROR-MSG is given, then this function will display the
# message and exit if running 'CMD --version' returns a non-zero exit
# status.
func_tool_version_output ()
{
    $debug_cmd

_G_cmd=$1
    _G_fatal_error_msg=$2

# Some tools, like 'git2cl' produce thousands of lines of output
    # unless stdin is /dev/null - in that case we want to return
    # successfully without saving all of that output.  Other tools,
    # such as 'help2man' exit with a non-zero status when stdin comes
    # from /dev/null, so we re-execute without /dev/null if that
    # happens.  This means that occasionally, the output from both calls
    # ends up in the result, but the alternative would be to discard the
    # output from one call, and hope the other produces something useful.
    { $_G_cmd --version </dev/null || $_G_cmd --version; } 2>/dev/null
    _G_status=$?

test 0 -ne "$_G_status" && test -n "$_G_fatal_error_msg" \
        && func_fatal_error "$_G_fatal_error_msg"

(exit $_G_status)
}

# func_tool_version_number CMD [FATAL-ERROR-MSG]
# ----------------------------------------------
# Pass arguments to func_tool_version_output, but set
# $func_tool_version_number_result to the last dot delimited digit string
# on the first line of output.
func_tool_version_number ()
{
    $debug_cmd

_G_verout=`func_tool_version_output "$@"`
    _G_status=$?

# A version number starts with a digit following a space on the first
    # line of output from `--version`.
    _G_verout=`echo "$_G_verout" |sed 1q`
    if test -n "$_G_verout"; then
      _G_vernum=`expr "$_G_verout" : '.* $[0-9][^ ]*$'`
    fi

if test -n "$_G_vernum"; then
      printf '%s\n' "$_G_vernum"
    else
      printf '%s\n' "$_G_verout"
    fi

(exit $_G_status)
}

# func_find_tool ENVVAR NAMES...
# ------------------------------
# Search for a required program.  Use the value of ENVVAR, if set,
# otherwise find the first of the NAMES that can be run (i.e.,
# supports --version).  If found, set ENVVAR to the program name,
# die otherwise.
func_find_tool ()
{
    $debug_cmd

_G_find_tool_envvar=$1
    shift
    _G_find_tool_names=$@
    eval "_G_find_tool_res=\$$_G_find_tool_envvar"
    if test -n "$_G_find_tool_res"; then
      _G_find_tool_error_prefix="\$$find_tool_envvar: "
    else
      _G_find_tool_res=
      _G_bestver=
      for _G_prog
      do
        _G_find_tool_save_IFS=$IFS
        IFS=${PATH_SEPARATOR-:}
	for _G_dir in $PATH; do
	  IFS=$_G_find_tool_save_IFS
	  _G_progpath=$_G_dir/$_G_prog
          test -r "$_G_progpath" && {
            _G_curver=`func_tool_version_number $_G_progpath`
	    case $_G_bestver,$_G_curver in
	    ,)
	      # first non--version responsive prog sticks!
              test -n "$_G_progpath" || _G_find_tool_res=$_G_progpath
              ;;
            ,*)
	      # first --version responsive prog beats non--version responsive!
	      _G_find_tool_res=$_G_progpath
	      _G_bestver=$_G_curver
	      ;;
	    *,*)
	      # another --version responsive prog must be newer to beat previous one!
	      test "x$_G_curver" = "x$_G_bestver" \
		|| func_lt_ver "$_G_curver" "$_G_bestver" \
		|| {
		     _G_find_tool_res=$_G_progpath
		     _G_bestver=$_G_curver
	           }
	      ;;
	    esac
          }
	done
	IFS=$_G_find_tool_save_IFS
      done
    fi
    if test -n "$_G_find_tool_res"; then
      func_tool_version_number >/dev/null $_G_find_tool_res "\
${_G_find_tool_error_prefix}Cannot run '$_G_find_tool_res --version'"

# Make sure the result is exported to the environment for children
      # to use.
      eval "$_G_find_tool_envvar=\$_G_find_tool_res"
      eval "export $_G_find_tool_envvar"
    else
      func_error "\
One of these is required:
       $_G_find_tool_names"
    fi
}

## -------------------- ##
## Resource management. ##
## -------------------- ##

# This section contains definitions for functions that each ensure a
# particular resource (a file, or a non-empty configuration variable for
# example) is available, and if appropriate to extract default values
# from pertinent package files.  Where a variable already has a non-
# empty value (as set by the package's 'bootstrap.conf'), that value is
# used in preference to deriving the default. Call them using their
# associated 'require_*' variable to ensure that they are executed, at
# most, once.
#
# It's entirely deliberate that calling these functions can set
# variables that don't obey the namespace limitations obeyed by the rest
# of this file, in order that that they be as useful as possible to
# callers.

# require_configure_ac
# --------------------
# Ensure that there is a 'configure.ac' or 'configure.in' file in the
# current directory that contains an uncommented call to AC_INIT, and
# that '$configure_ac' contains its name.
require_configure_ac=func_require_configure_ac
func_require_configure_ac ()
{
    $debug_cmd

test -z "$configure_ac" \
      && func_autoconf_configure configure.ac && configure_ac=configure.ac
    test -z "$configure_ac" \
      && func_autoconf_configure configure.in && configure_ac=configure.in
    test -z "$configure_ac" \
      || func_verbose "found '$configure_ac'"

require_configure_ac=:
}

# require_gnu_m4
# --------------
# Search for GNU M4, and export it in $M4.
require_gnu_m4=func_require_gnu_m4
func_require_gnu_m4 ()
{
    $debug_cmd

test -n "$M4" || {
      # Find the first m4 binary that responds to --version.
      func_find_tool M4 gm4 gnum4 m4
    }

test -n "$M4" || func_fatal_error "\
Please install GNU M4, or 'export M4=/path/to/gnu/m4'."

func_verbose "export M4='$M4'"

# Make sure the search result is visible to subshells
    export M4

require_gnu_m4=:
}

## --------------- ##
## Core functions. ##
## --------------- ##

# This section contains the high level functions used when calling this
# file as a script. 'func_extract_trace' is probably the only one that you
# won't want to replace if you source this file into your own script.

# func_extract_trace MACRO_NAMES [FILENAME]...
# --------------------------------------------
# set '$func_extract_trace_result' to a colon delimited list of arguments
# to any of the comma separated list of MACRO_NAMES in FILENAME. If no
# FILENAME is given, then '$configure_ac' is assumed.
func_extract_trace ()
{
    $debug_cmd

$require_configure_ac
    $require_gnu_m4

_G_m4_traces=`$ECHO "--trace=$1" |$SED 's%,% --trace=%g'`
    _G_re_macros=`$ECHO "($1)" |$SED 's%,%|%g'`
    _G_macros="$1"; shift
    test $# -gt 0 || {
      set dummy $configure_ac
      shift
    }

# Generate an error if the first file is missing
    <"$1"

# Sadly, we can't use 'autom4te' tracing to extract macro arguments,
    # because it complains about things we want to ignore at bootstrap
    # time - like missing m4_include files; AC_PREREQ being newer than
    # the installed autoconf; and returns nothing when tracing
    # 'AM_INIT_AUTOMAKE' when aclocal hasn't been generated yet.
    #
    # The following tries to emulate a less persnickety version of (and
    # due to not having to wait for Perl startup on every invocation,
    # it's probably faster too):
    #
    #    autom4te --language=Autoconf --trace=$my_macro:\$% "$@"
    #
    # First we give a minimal set of macro declarations to M4 to prime
    # it for reading Autoconf macros, while still providing some of the
    # functionality generally used at m4-time to supply dynamic
    # arguments to Autocof functions, but without following
    # 'm4_s?include' files.
    _G_mini='
        # Initialisation.
        m4_changequote([,])
        m4_define([m4_copy],   [m4_define([$2], m4_defn([$1]))])
        m4_define([m4_rename], [m4_copy([$1], [$2])m4_undefine([$1])])

# Disable these macros.
        m4_undefine([m4_dnl])
        m4_undefine([m4_include])
        m4_undefine([m4_m4exit])
        m4_undefine([m4_m4wrap])
        m4_undefine([m4_maketemp])

# Copy and rename macros not handled by "m4 --prefix".
        m4_define([dnl],         [m4_builtin([dnl])])
        m4_copy([m4_define],     [m4_defun])
        m4_rename([m4_ifelse],   [m4_if])
        m4_ifdef([m4_mkstemp],   [m4_undefine([m4_mkstemp])])
        m4_rename([m4_patsubst], [m4_bpatsubst])
        m4_rename([m4_regexp],   [m4_bregexp])

# "m4sugar.mini" - useful m4-time macros for dynamic arguments.
        # If we discover packages that need more m4 macros defined in
        # order to bootstrap correctly, add them here:
        m4_define([m4_bmatch],
            [m4_if([$#], 0, [], [$#], 1, [], [$#], 2, [$2],
                   [m4_if(m4_bregexp([$1], [$2]), -1,
                          [$0([$1], m4_shift3($@))], [$3])])])
        m4_define([m4_ifndef], [m4_ifdef([$1], [$3], [$2])])
        m4_define([m4_ifset],
            [m4_ifdef([$1], [m4_ifval(m4_defn([$1]), [$2], [$3])], [$3])])
        m4_define([m4_require], [$1])
        m4_define([m4_shift3], [m4_shift(m4shift(m4shift($@)))])

# "autoconf.mini" - things from autoconf macros we care about.
        m4_copy([m4_defun], [AC_DEFUN])

# Dummy definitions for the macros we want to trace.
        # AM_INIT_AUTOMAKE at least produces no trace without this.
    '

_G_save=$IFS
    IFS=,
    for _G_macro in $_G_macros; do
      IFS=$_G_save
      func_append _G_mini "AC_DEFUN([$_G_macro])$nl"
    done
    IFS=$_G_save

# We discard M4's stdout, but the M4 trace output from reading our
    # "autoconf.mini" followed by any other files passed to this
    # function is then scanned by sed to transform it into a colon
    # delimited argument list assigned to a shell variable.
    _G_transform='s|#.*$||; s|^dnl .*$||; s| dnl .*$||;'

# Unfortunately, alternation in regexp addresses doesn't work in at
    # least BSD (and hence Mac OS X) sed, so we have to append a capture
    # and print block for each traced macro to the sed transform script.
    _G_save=$IFS
    IFS=,
    for _G_macro in $_G_macros; do
      IFS=$_G_save
      func_append _G_transform '
        /^m4trace: -1- '"$_G_macro"'/ {
          s|^m4trace: -1- '"$_G_macro"'[([]*||
          s|], [[]|:|g
          s|[])]*$|:|
          s|$.$:$|\1|
          p
        }'
    done
    IFS=$_G_save

# Save the command pipeline results for further use by callers of
    # this function.
    func_extract_trace_result=`$ECHO "$_G_mini" \
      |$M4 -daq --prefix $_G_m4_traces - "$@" 2>&1 1>/dev/null \
      |$SED -n -e "$_G_transform"`
}

# func_extract_trace_first MACRO_NAMES [FILENAME]...
# --------------------------------------------------
# Exactly like func_extract_trace, except that only the first argument
# to the first invocation of one of the comma separated MACRO_NAMES is
# returned in '$func_extract_trace_first_result'.
func_extract_trace_first ()
{
    $debug_cmd

func_extract_trace ${1+"$@"}
    func_extract_trace_first_result=`$ECHO "$func_extract_trace_result" \
      |$SED -e 's|:.*$||g' -e 1q`
}

# func_main [ARG]...
# ------------------
func_main ()
{
    $debug_cmd

# Configuration.
    usage='$progname MACRO_NAME FILE [...]'

long_help_message='
The first argument to this program is the name of an autotools macro
whose arguments you want to extract by examining the files listed in the
remaining arguments using the same tool that Autoconf and Automake use,
GNU M4.

The arguments are returned separated by colons, with each traced call
on a separate line.'

# Option processing.
    func_options "$@"
    eval set dummy "$func_options_result"; shift

# Validate remaining non-option arguments.
    test $# -gt 1 \
        || func_fatal_help "not enough arguments"

# Pass non-option arguments to extraction function.
    func_extract_trace "$@"

# Display results.
    test -n "$func_extract_trace_result" \
        && $ECHO "$func_extract_trace_result"

# The End.
    exit $EXIT_SUCCESS
}

## --------------------------- ##
## Actually perform the trace. ##
## --------------------------- ##

# Only call 'func_main' if this script was called directly.
test extract-trace = "$progname" && func_main "$@"

# Local variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-pattern: "20/scriptversion=%:y-%02m-%02d.%02H; # UTC"
# time-stamp-time-zone: "UTC"
# End:

# Set a version string.
scriptversion='(GNU libtool) 2.4.6'

## ---------------- ##
## Options parsing. ##
## ---------------- ##

# Hook in the functions to make sure our own options are parsed during
# the option parsing loop.

usage='$progpath [OPTION]...'

# Short help message in response to '-h'.
usage_message="Options:
   -c, --copy          copy files rather than symlinking them
       --debug         enable verbose shell tracing
   -n, --dry-run       print commands rather than running them
   -f, --force         replace existing files
   -i, --install       copy missing auxiliary files
       --ltdl[=DIR]    install libltdl sources [default: libltdl]
       --no-warnings   equivalent to '-Wnone'
       --nonrecursive  prepare ltdl for non-recursive make
   -q, --quiet         work silently
       --recursive     prepare ltdl for recursive make
       --subproject    prepare ltdl to configure and build independently
   -v, --verbose       verbosely report processing
       --version       print version information and exit
   -W, --warnings=CATEGORY
                       report the warnings falling in CATEGORY [all]
   -h, --help          print short or long help message
"

# Additional text appended to 'usage_message' in response to '--help'.
long_help_message=$long_help_message"
       'environment'   show warnings about LIBTOOLIZE_OPTIONS content
       'file'          show warnings about file copying and linking

The following space or comma delimited options can be passed to $progname
via the environment variable LIBTOOLIZE_OPTIONS, unknown environment
options are ignored:

--debug         enable verbose shell tracing
       --no-warnings   don't display warning messages
       --quiet         work silently
       --verbose       verbosely report processing

You must 'cd' to the top directory of your package before you run
'$progname'.

When reporting a bug, please describe a test case to reproduce it and
include the following information:

host-triplet:   x86_64-redhat-linux-gnu
       version:        $progname (GNU libtool) 2.4.6
       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`

Report bugs to <bug-libtool@gnu.org>.
GNU libtool home page: <http://www.gnu.org/software/libtool/>.
General help using GNU software: <http://www.gnu.org/gethelp/>.
"

warning_categories='environment file'

# libtoolize_environment_options [ARG]...
# ---------------------------------------
# Parse environment options.
libtoolize_environment_options ()
{
    $debug_mode

my_sed_env_opt='1s/^$[^,:; ]*$.*$/\1/;q'
    my_sed_env_rest='1s/^[^,:; ]*[,:; ]*$.*$$/\1/;q'

while test -n "$LIBTOOLIZE_OPTIONS"; do
      opt=`echo "$LIBTOOLIZE_OPTIONS" | $SED "$my_sed_env_opt"`
      LIBTOOLIZE_OPTIONS=`echo "$LIBTOOLIZE_OPTIONS" | $SED "$my_sed_env_rest"`

case $opt in
        --debug|--no-warn|--no-warning|--no-warnings|--quiet|--verbose)
		envopts="${envopts+$envopts }$opt"			  ;;
        --*)	env_warning="${env_warning+$env_warning
}unrecognized environment option '$opt'"				  ;;
        *)	func_fatal_help "garbled LIBTOOLIZE_OPTIONS near '$opt'"  ;;
      esac
    done

# Pass back the updated list of options.
    if test -n "$envopts"; then
      func_quote_for_eval "$envopts" ${1+"$@"}
    else
      func_quote_for_eval ${1+"$@"}
    fi
    libtoolize_environment_options_result=$func_quote_for_eval_result
}
func_add_hook func_options_prep libtoolize_environment_options

# libtoolize_options_prep [ARG]...
# --------------------------------
# Preparation for options parsed by libtoolize.
libtoolize_options_prep ()
{
    $debug_cmd

# Option defaults:
    opt_copy=false
    opt_dry_run=false
    opt_force=false
    opt_install=false
    opt_ltdl=false
    opt_nonrecursive=false
    opt_quiet=false
    opt_recursive=false
    opt_subproject=false

ltdl_mode=

# Pass back the list of options.
    func_quote_for_eval ${1+"$@"}
    libtoolize_options_prep_result=$func_quote_for_eval_result
}
func_add_hook func_options_prep libtoolize_options_prep

# libtoolize_parse_options [ARG]...
# ---------------------------------
# Provide handling for libtoolize specific options.
libtoolize_parse_options ()
{
    $debug_cmd

# Perform our own loop to consume as many options as possible in
    # each iteration.
    while test $# -gt 0; do
      _G_opt=$1
      shift
      case $_G_opt in
        --copy|-c)	opt_copy=: ;;

--dry-run|--dryrun|-n)
			$opt_dry_run || {
			  opt_dry_run=:
			  CP="func_echo_all $CP"
			  test -n "$LN_S" && LN_S="func_echo_all $LN_S"
			  MKDIR="func_echo_all $MKDIR"
			  RM="func_echo_all $RM"
			}
			;;

--force|-f)	opt_force=: ;;

--install|-i)	opt_install=: ;;

--ltdl)		opt_ltdl=:
			if test 0 -lt $#; then
			  case $1 in
			    -*) ;;
			    *)  ltdl_dir=`$ECHO "$1" | $SED 's|/*$||'`
			        shift
			        ;;
			  esac
			fi
			;;

--nonrecursive|--non-recursive)
			opt_nonrecursive=:
			;;

--quiet|--automake|-q) # --automake is for 1.5 compatibility
			opt_quiet=: ;;

--recursive)	opt_recursive=: ;;

--subproject)	opt_subproject=: ;;

# Separate non-argument short options:
        -c*|-f*|-i*|-n*|-q*)
			func_split_short_opt "$_G_opt"
			set dummy "$func_split_short_opt_name" \
			    "-$func_split_short_opt_arg" ${1+"$@"}
			shift
			;;

# An option not handled by this hook function:
        *)		set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
      esac
    done

# save modified positional parameters for caller
    func_quote_for_eval ${1+"$@"}
    libtoolize_parse_options_result=$func_quote_for_eval_result
}
func_add_hook func_parse_options libtoolize_parse_options

# libtoolize_validate_options [ARG]...
# ------------------------------------
# Perform any sanity checks on option settings and/or unconsumed
# arguments.
libtoolize_validate_options ()
{
    # show any warnings saved by LIBTOOLIZE_OPTIONS parsing
    test -n "$env_warning" && func_warning environment "$env_warning"

# validate $opt_nonrecursive, $opt_recursive and $opt_subproject
    if $opt_nonrecursive; then
      if $opt_recursive || $opt_subproject; then
        func_error "you can have at most one of --non-recursive, --recursive and --subproject"
      fi
      ltdl_mode=nonrecursive
    elif $opt_recursive; then
      $opt_subproject &&
        func_error "you can have at most one of --non-recursive, --recursive and --subproject"
      ltdl_mode=recursive
    elif $opt_subproject; then
      ltdl_mode=subproject
    fi

# any remaining arguments are an error
    test 0 -lt $# &&
      func_fatal_help "unknown additional arguments: '${1+$@}'"

# Pass back the empty argument list
    func_quote_for_eval ${1+"$@"}
    libtoolize_validate_options_result=$func_quote_for_eval_result
}
func_add_hook func_validate_options libtoolize_validate_options

# Process options as early as possible so that --help and --version
# can return quickly.
func_options ${1+"$@"}
eval set dummy "$func_options_result"; shift

# func_notquiet_once MSG_VAR
# --------------------------
# Call func_notquiet with the value of MSG_VAR, and then set MSG_VAR='' so
# that subsequent calls will have no effect.
func_notquiet_once ()
{
    $debug_cmd

if test -n "$1"; then
      eval my_msg=\$$1

if test -n "$my_msg"; then
        func_notquiet "$my_msg"
        eval $1=
      fi
    fi
}

# func_notquiet_hdr MSG_VAR ARG...
# --------------------------------
# With at least 1 non-empty ARG, call func_notquiet_once with MSG_VAR,
# and then func_notquiet with the remaining arguments.
func_notquiet_hdr ()
{
    $debug_cmd

my_msg_var=$1; shift
    test -n "$*" || return

func_notquiet_once "$my_msg_var"
    func_notquiet "$*"
}

# func_notquiet_error_hdr MSG_VAR ARG...
# --------------------------------------
# Much the same as func_notquiet_header, but for (non-fatal) error
# messages.
func_notquiet_error_hdr ()
{
    $debug_cmd

my_msg_var=$1; shift
    test -n "$*" || return

func_notquiet_once "$my_msg_var"
    func_error "$*"

exit_status=$EXIT_FAILURE
}

# func_copy FILENAME SRCDIR DESTDIR [MSG_VAR [FILTER]]
# ----------------------------------------------------
# If option '--copy' was specified, or soft-linking SRCFILE to DESTFILE
# fails, then try to copy SRCFILE to DESTFILE (making sure to update the
# timestamp so that a series of files with dependencies can be copied
# in the right order that their timestamps won't trigger rebuilds). If
# FILTER is non-empty, it is a sed script to apply to SRCFILE as it is
# copied.  MSG_VAR names a variable for use with func_notquiet_hdr.
func_copy ()
{
    $debug_cmd

my_filename=$1
    my_srcdir=$2
    my_destdir=$3
    my_msg_var=$4
    my_filter=$5

my_srcfile=$my_srcdir/$my_filename
    my_destfile=$my_destdir/$my_filename

# Libtool is probably misinstalled if this happens:
    test -f "$my_srcfile" || {
      func_notquiet_error_hdr "$my_msg_var" "'$my_srcfile' not found"
      return 1
    }

# Require --force to remove existing $my_destfile.
    $opt_force && $RM "$my_destfile"
    test -f "$my_destfile" && {
      func_notquiet_error_hdr "$my_msg_var" \
        "'$my_destfile' exists: use '--force' to overwrite"
      return 1
    }

# Be careful to support 'func_copy dir/target srcbase destbase'.
    func_dirname "$my_destfile"
    func_mkdir_p "$func_dirname_result"

# Filters always take priority.
    if test -n "$my_filter"; then
      if $opt_dry_run || $SED -e "$my_filter" "$my_srcfile" > "$my_destfile" 2>/dev/null
      then
        func_notquiet_once "$my_msg_var"
        if $opt_verbose; then
          func_notquiet "$SED -e '$my_filter' $my_srcfile > $my_destfile"
         else
          func_notquiet "creating file '$my_destfile'"
         fi
      else
        func_notquiet_error_hdr "$my_msg_var" "creating '$my_destfile' from '$my_srcfile' failed"
        return 1
      fi
      return 0
    fi

# Otherwise copy or link according to '--copy' option.
    if $opt_copy; then
      my_copycmd=$CP
      my_copy_type=copying
    else
      my_copycmd=$LN_S
      my_copy_type=linking
    fi
    my_copy_msg="$my_copy_type file '$my_destfile'"
    $opt_verbose && my_copy_msg="$my_copycmd $my_srcfile $my_destdir"

if $opt_dry_run || $my_copycmd "$my_srcfile" "$my_destfile" 2>/dev/null
    then
      func_notquiet_hdr "$my_msg_var" "$my_copy_msg"
    else
      func_notquiet_error_hdr "$my_msg_var" \
        "$my_copy_type '$my_srcdir/$my_filename' to '$my_destdir/' failed"
      return 1
    fi
}

# func_included_files SEARCHFILE
# ------------------------------
# Output INCLUDEFILE if SEARCHFILE m4_includes it, else output SEARCHFILE.
func_included_files ()
{
    $debug_cmd

my_searchfile=$1

my_include_regex=
    my_sed_include='
        /^m4_include(\[.*\])$/ {
	    s|^m4_include(\[$.*$\])$|\1|
	    p
	}
        d'

if test -f "$my_searchfile"; then
      $ECHO "$my_searchfile"

# Only recurse when we don't care if all the variables we use get
      # trashed, since they are in global scope.
      for my_filename in `$SED "$my_sed_include" "$my_searchfile"`; do
	func_included_files $my_filename
      done
    fi
}

# func_serial FILENAME [MACRO_REGEX]
# ----------------------------------
# Output the value of the serial number comment in FILENAME, where the
# comment line must also match MACRO_REGEX, if given.
func_serial ()
{
    $debug_cmd

my_filename=$1
    my_macro_regex=$2
    my_sed_serial='
	/^# serial [1-9][0-9.]*[	 ]*'"$my_macro_regex"'[	 ]*$/ {
	    s|^# serial $[1-9][0-9.]*$.*$|\1|
	    q
	}
	d'

# Search FILENAME and all the files it m4_includes for a serial number
    # in the file that AC_DEFUNs MACRO_REGEX.
    my_serial=
    func_dirname_and_basename "$my_filename"
    my_filebase=$func_basename_result
    for my_file in `func_included_files "$my_filename"`; do
      if test -z "$my_macro_regex" ||
         test aclocal.m4 = "$my_filename" ||
         test "X$my_macro_regex" = "X$my_filebase" ||
         func_grep '^AC_DEFUN(\['"$my_macro_regex" "$my_file"
      then
        my_serial=`$SED -e "$my_sed_serial" "$my_file"`
	break
      fi
    done

# If the file has no serial number, we assume it's ancient.
    test -n "$my_serial" || my_serial=0

$ECHO "$my_serial"
}

# func_serial_max SERIAL1 SERIAL2
# -------------------------------
# Compare (possibly multi-part, '.' delimited) serial numbers, and
# return the largest in $func_serial_max_result.  If they are the
# same, func_serial_max_result will be empty.
func_serial_max ()
{
    $debug_cmd

my_serial1=$1
    my_serial2=$2

my_sed_dot='s/\..*$//g'
    my_sed_rest='s/^[0-9][1-9]*\.*//'
    my_sed_digits='s/[^0-9.]//g'

# Incase they turn out to be the same, we'll set it to empty
    func_serial_max_result=

test "X$1$2" = X`$ECHO "$1$2" | $SED "$my_sed_digits"` || {
      func_error "serial numbers '$1' or '$2' contain non-digit chars"
      return
    }

while test -n "$my_serial1$my_serial2"; do
      my_serial1_part=`$ECHO "$my_serial1" | $SED "$my_sed_dot"`
      my_serial2_part=`$ECHO "$my_serial2" | $SED "$my_sed_dot"`

test -z "$my_serial1_part$my_serial2_part" \
        && break

test -z "$my_serial1_part" \
        && { func_serial_max_result=$2; break; }

test -z "$my_serial2_part" \
        && { func_serial_max_result=$1; break; }

test "$my_serial1_part" -gt "$my_serial2_part" \
        && { func_serial_max_result=$1; break; }

test "$my_serial2_part" -gt "$my_serial1_part" \
        && { func_serial_max_result=$2; break; }

my_serial1=`$ECHO "$my_serial1" | $SED "$my_sed_rest"`
      my_serial2=`$ECHO "$my_serial2" | $SED "$my_sed_rest"`
    done
}

# func_serial_update_check SRCFILE SRC_SERIAL DESTFILE DEST_SERIAL
# ----------------------------------------------------------------
# Unless SRC_SERIAL is newer than DEST_SERIAL set $func_serial_update_check
# to 'false'.
func_serial_update_check ()
{
    $debug_cmd

$require_ac_ltdl_dir
    $require_ac_macro_dir

my_srcfile=$1
    my_src_serial=$2
    my_destfile=$3
    my_dest_serial=$4
    my_update_p=:

if test -f "$my_destfile"; then
      test 0 = "$my_src_serial" && {
        func_warning file "no serial number on '$my_srcfile', not copying."
	return
      }

# Determine whether the destination has an older serial.
      func_serial_max "$my_src_serial" "$my_dest_serial"
      test "X$my_src_serial" = "X$func_serial_max_result" || my_update_p=false

test "X$my_src_serial" = "X$func_serial_max_result" \
        && func_verbose "'$my_srcfile' is serial $my_src_serial, greater than $my_dest_serial in '$my_destfile'"

if test "X$my_dest_serial" = "X$func_serial_max_result"; then
        func_verbose "'$my_srcfile' is serial $my_src_serial, less than $my_dest_serial in '$my_destfile'"
	$opt_force || if test -n "$ac_macro_dir$ac_ltdl_dir"; then
           func_error "'$my_destfile' is newer: use '--force' to overwrite"
        fi
      fi
    fi

func_serial_update_check_result=$my_update_p
}

# func_aclocal_update_check FILENAME
# ----------------------------------
# Unless serial number of FILENAME is newer than the matching serial number
# in aclocal.m4, set $func_aclocal_update_check to 'false'.
func_aclocal_update_check ()
{
    $debug_cmd

my_filename=$1

my_srcfile=$aclocaldir/$1
    my_destfile=aclocal.m4

case $my_filename in
      libtool.m4)
	my_src_serial=`func_serial "$my_srcfile" LT_INIT`
	my_dest_serial=`func_serial "$my_destfile" LT_INIT`

# Strictly, this libtoolize ought not to have to deal with ancient
	# serial formats, but we accept them here to be complete:
	test 0 = "$my_src_serial" &&
	  my_src_serial=`func_serial "$my_srcfile" 'A[CM]_PROG_LIBTOOL'`
	test 0 = "$my_dest_serial" &&
	  my_dest_serial=`func_serial "$my_destfile" 'A[CM]_PROG_LIBTOOL'`
	;;
      ltdl.m4)
	my_src_serial=`func_serial "$my_srcfile" LTDL_INIT`
	my_dest_serial=`func_serial "$my_destfile" LTDL_INIT`
	;;
      *)
	my_src_serial=`func_serial "$my_srcfile" "$my_filename"`
	my_dest_serial=`func_serial "$my_destfile" "$my_filename"`
	;;
    esac

func_serial_update_check \
      "$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"

func_aclocal_update_check_result=$func_serial_update_check_result
}

# func_serial_update FILENAME SRCDIR DESTDIR [MSG_VAR] [MACRO_RE] [OLD_MACRO_RE]
# ------------------------------------------------------------------------------
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
# has a newer serial number, or DESTFILE does not yet exist, or the user
# specified '--force' at the command line.  If given, MACRO_REGEX or
# OLD_MACRO_REGEX must match any text after "# serial N" in both files.
func_serial_update ()
{
    $debug_cmd

my_filename=$1
    my_srcdir=$2
    my_destdir=$3
    my_msg_var=$4
    my_macro_regex=$5
    my_old_macro_regex=$6

my_serial_update_p=:
    my_return_status=1
    my_srcfile=$my_srcdir/$my_filename
    my_destfile=$my_destdir/$my_filename

test -f "$my_srcfile" || func_fatal_error "'$my_srcfile' does not exist."

if test -f "$my_destfile"; then
      my_src_serial=`func_serial "$my_srcfile" "$my_macro_regex"`
      my_dest_serial=`func_serial "$my_destfile" "$my_macro_regex"`

test 0 = "$my_dest_serial" &&
        my_dest_serial=`func_serial "$my_destfile" "$my_old_macro_regex"`

func_serial_update_check \
        "$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
      my_serial_update_p=$func_serial_update_check_result
    fi

if $my_serial_update_p || $opt_force; then
      $RM "$my_destfile"
      func_copy "$my_filename" "$my_srcdir" "$my_destdir" "$my_msg_var"
      my_return_status=$?
    elif $opt_force && test "X$my_dest_serial" = "X$my_src_serial"; then
      func_notquiet_hdr "$my_msg_var" "'$my_destfile' is already up to date."
    fi

# Do this after the copy for hand maintained 'aclocal.m4', incase
    # it has 'm4_include([DESTFILE])', so the copy effectively already
    # updated 'aclocal.m4'.
    my_included_files=`func_included_files aclocal.m4`
    case `echo " "$my_included_files" "` in

# Skip included files:
      *" $my_destfile "*) ;;

# Otherwise compare to aclocal.m4 serial number (func_serial
      # returns 0 for older macro serial numbers before we provided
      # serial tags, so the update message will be correctly given
      # if aclocal.m4 contains an untagged --i.e older-- macro file):
      *)
        if test -f aclocal.m4; then
          func_serial_max \
              "$my_src_serial" `func_serial aclocal.m4 "$my_macro_regex"`
          if test "X$my_src_serial" = "X$func_serial_max_result"; then
	      func_notquiet_hdr "$my_msg_var" \
                "You should add the contents of '$my_destfile' to 'aclocal.m4'."
          fi
        fi
        ;;
    esac
    return $my_return_status
}

# func_keyword_update FILENAME SRCDIR DESTDIR SED_SCRIPT [MSG_VAR]
# ----------------------------------------------------------------
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
# has a newer revision according to the serial number extracted by
# SED_SCRIPT, or DESTFILE does not yet exist, or the user specified
# '--force' at the command line.
func_keyword_update ()
{
    $debug_cmd

my_filename=$1
    my_srcdir=$2
    my_destdir=$3
    my_sed_script=$4
    my_msg_var=$5

my_srcfile=$my_srcdir/$my_filename
    my_destfile=$my_destdir/$my_filename

my_keyword_update_p=:

test -f "$my_srcfile" || func_fatal_error "'$my_srcfile' does not exist."

if test -f "$my_destfile"; then
      my_src_serial=`$SED -e "$my_sed_script" "$my_srcfile"`
      test -z "$my_src_serial" && {
        func_warning file "no serial number in '$my_srcfile', not copying."
	return
      }

my_dest_serial=`$SED -e "$my_sed_script" "$my_destfile"`
      test -n "$my_dest_serial" || my_dest_serial=0

func_serial_update_check \
         "$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
      my_keyword_update_p=$func_serial_update_check_result
    fi

if $my_keyword_update_p || $opt_force; then
      $RM "$my_destfile"
      func_copy "$my_filename" "$my_srcdir" "$my_destdir" "$my_msg_var"
    elif $opt_verbose || $opt_force && test "X$my_dest_serial" = "X$my_src_serial"; then
      func_notquiet_hdr "$my_msg_var" "'$my_destfile' is already up to date."
    fi
}

# func_ltmain_update FILENAME SRCDIR DESTDIR [MSG_VAR]
# ----------------------------------------------------
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
# has a newer revision, or DESTFILE does not yet exist, or the user
# specified '--force' at the command line.
func_ltmain_update ()
{
    $debug_cmd

my_sed_ltmain='
	/^package_revision='\''*[0-9][1-9.]*'\''*/ {
	    s|^package_revision='\''*$[0-9.]*$'\''*[	 ]*$|\1|
	    p
	}
	d'

func_keyword_update "$1" "$2" "$3" "$my_sed_ltmain" "$4"

return $my_return_status
}

# func_config_update FILENAME SRCDIR DESTDIR [MSG_VAR]
# ----------------------------------------------------
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
# has a newer timestamp, or DESTFILE does not yet exist, or the user
# specified '--force' at the command line.
func_config_update ()
{
    $debug_cmd

my_sed_config='
	/^timestamp='\''*[0-9][1-9-]*'\''*/ {
	    s|^timestamp='\''*$[0-9-]*$'\''*|\1|
	    s|-|.|g
	    p
	}
	d'

func_keyword_update "$1" "$2" "$3" "$my_sed_config" "$4"

return $my_return_status
}

# func_install_update FILENAME SRCDIR DESTDIR [MSG_VAR]
# -----------------------------------------------------
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
# has a newer timestamp, or DESTFILE does not yet exist, or the user
# specified '--force' at the command line.
func_install_update ()
{
    $debug_cmd

my_sed_install='
	/^scriptversion='\''*[0-9][1-9.-]*'\''*/ {
	    s|[#;].*||
	    s|^scriptversion='\''*$[0-9.-]*$'\''*|\1|
	    s|-|.|g
	    p
	}
	d'

func_keyword_update "$1" "$2" "$3" "$my_sed_install" "$4"

return $my_return_status
}

# func_install_pkgmacro_files
# ---------------------------
# Install copies of the libtool and libltdl m4 macros into this package.
func_install_pkgmacro_files ()
{
    $debug_cmd

$require_ac_macro_dir
    $require_am_macro_dir
    $require_ltdl_mode
    $require_macro_dir

$opt_ltdl || test -n "$ac_macro_dir$am_macro_dir" || return

# Remove any lingering files that my have been installed by some
    # previous libtoolize release:
    $opt_force && for file in $all_pkgmacro_files; do
      test -f "$macro_dir/$file" && func_verbose "rm -f '$macro_dir/$file'"
      rm -f "$macro_dir/$file"
    done

# Install the libltdl autoconf macros to this project's source tree.
    $opt_quiet || if test -n "$ac_macro_dir"; then
      my_pkgmacro_header="putting macros in AC_CONFIG_MACRO_DIRS, '$ac_macro_dir'."
    else
      my_pkgmacro_header="putting macros in '$macro_dir'."
    fi

for file in $pkgmacro_files; do
      case $file in
        libtool.m4)
          func_serial_update "$file" "$aclocaldir" "$macro_dir" \
            my_pkgmacro_header LT_INIT 'A[CM]_PROG_LIBTOOL'
          ;;
        ltdl.m4)
          if $opt_ltdl; then
            func_serial_update "$file" "$aclocaldir" "$macro_dir" \
              my_pkgmacro_header 'LTDL_INIT'
          else
            func_verbose "Not copying '$macro_dir/$file', libltdl not used."
          fi
          ;;
        ltoptions.m4|ltsugar.m4|ltversion.m4|lt~obsolete.m4)
          func_serial_update "$file" "$aclocaldir" "$macro_dir" \
            my_pkgmacro_header "$file"
          ;;
        *)
          if $opt_ltdl; then
            func_serial_update "$file" "$aclocaldir" "$macro_dir" \
              my_pkgmacro_header "$file"
          else
            func_verbose "Not copying '$macro_dir/$file', libltdl not used."
          fi
          ;;
      esac
    done
}

# func_install_pkgltdl_files
# --------------------------
# Install copies of the libltdl files into this package.  Any auxiliary
# or m4 macro files needed in the libltdl tree will also be copied by
# func_install_pkgaux_files and func_install_pkgmacro_files resp.
func_install_pkgltdl_files ()
{
    $debug_cmd

$opt_ltdl || return

$require_ac_ltdl_dir
    $require_ltdl_dir
    $require_ltdl_mode

# Remove any lingering files that my have been installed by some
    # previous libtoolize release:
    $opt_force && for file in $all_pkgltdl_files; do
      test -f "$ltdl_dir/$file" && func_verbose "rm -f '$ltdl_dir/$file'"
      rm -f "$ltdl_dir/$file"
    done

# Copy all the files from installed libltdl to this project, if the
    # user specified '--ltdl'.
    $opt_quiet || if test -n "$ac_ltdl_dir"; then
      pkgltdl_header="putting libltdl files in LT_CONFIG_LTDL_DIR, '$ac_ltdl_dir'."
    else
      pkgltdl_header="putting libltdl files in '$ltdl_dir'."
    fi

$require_filter_Makefile_am
    $require_filter_ltdl_mk

# Copy ltdl sources appropriate to the requested ltdl_mode.
    for file in $pkgltdl_files; do
      my_copy_filter=
      case $file in
        Makefile.am|Makefile.in)
          test nonrecursive = "$ltdl_mode" && continue
          my_copy_filter=$filter_Makefile_am
          ;;

ltdl.mk)
          test nonrecursive = "$ltdl_mode" || continue
          my_copy_filter=$filter_ltdl_mk
          ;;

aclocal.m4)
          test subproject = "$ltdl_mode" && {
            $require_filter_aclocal_m4

# Always copy aclocal.m4, otherwise regenerating it can
            # overwrite the destination if it is symlinked.
            ( opt_copy=:
              func_copy "$file" "$pkgltdldir" "$ltdl_dir" \
                pkgltdl_header "$filter_aclocal_m4"
            )
          }
          continue
	  ;;

config-h.in)
          test subproject = "$ltdl_mode" || continue
          ;;

configure)
          test subproject = "$ltdl_mode" && {
            $require_filter_configure_ac

# Always copy configure, otherwise regenerating it can
            # overwrite the destination if it is symlinked.
            ( opt_copy=:
              func_copy "$file" "$pkgltdldir" "$ltdl_dir" \
                pkgltdl_header "$filter_configure_ac"
            )
          }
          continue
	  ;;

configure.ac)
          test subproject = "$ltdl_mode" || continue
          $require_filter_configure_ac
          my_copy_filter=$filter_configure_ac
          ;;
      esac

# Still here?  Copy the file then, with selected filters.
      func_copy "$file" "$pkgltdldir" "$ltdl_dir" \
        pkgltdl_header "$my_copy_filter"

# FIXME: Remove in 2013
      #        (along with deprecation warning in func_check_macros)
      test ltdl.mk = "$file" \
        && func_grep "^-\?include $ltdl_dir/Makefile.inc\$" Makefile.am \
        && mv "$ltdl_dir/$file" "$ltdl_dir/Makefile.inc" \
        && func_notquiet "renaming file '$ltdl_dir/Makefile.inc'"
    done
}

# func_install_pkgaux_files
# -------------------------
# Install copies of the auxiliary files into this package according to
# the whether libltdl is included as a subproject, and whether the parent
# shares the AC_CONFIG_AUX_DIR setting.
func_install_pkgaux_files ()
{
    $debug_cmd

$require_ac_aux_dir
    $require_aux_dir
    $require_configure_ac
    $require_ltdl_mode

# Remove any lingering files that my have been installed by some
    # previous libtoolize release:
    $opt_force && for file in $all_pkgaux_files; do
      test -f "$aux_dir/$file" && func_verbose "rm -f '$aux_dir/$file'"
      rm -f "$aux_dir/$file"
    done

if test -n "$ac_aux_dir"; then
      pkgaux_header="putting auxiliary files in AC_CONFIG_AUX_DIR, '$ac_aux_dir'."
    else
      pkgaux_header="putting auxiliary files in '$aux_dir'."
    fi

for file in $pkgaux_files; do
      case $file in
        config.guess|config.sub)
          $opt_install || test subproject = "$ltdl_mode" || continue
          func_config_update "$file" "$pkgauxdir" "$aux_dir" pkgaux_header
          ;;
        install-sh)
          $opt_install || test subproject = "$ltdl_mode" || continue
          func_install_update "$file" "$pkgauxdir" "$aux_dir" pkgaux_header
          ;;
        ltmain.sh)
          func_ltmain_update "$file" "$pkgauxdir" "$aux_dir" pkgaux_header
          ;;
        *)
          test subproject = "$ltdl_mode" || continue
          func_copy "$file" "$pkgauxdir" "$aux_dir" pkgaux_header
          ;;
      esac
    done

# If the parent project is using Autoconf and linking with Libtool,
    # even if subproject libltdl already has a copy, the parent project
    # will still need to build libtool for its own purposes, and might
    # need another copy of ltmain.sh if the parent didn't declare an
    # AC_CONFIG_AUX_DIR.
    pkgaux_hdr="putting another copy of auxiliary files in '.'"
    test -f "$configure_ac" \
      && test -z "$ac_aux_dir" \
      && test subproject = "$ltdl_mode" \
      && test "$aux_dir" = "$ltdl_dir" \
      && func_ltmain_update "$file" "$pkgauxdir" . pkgaux_hdr

# FIXME: Remove in 2013.
    # Very old parent projects using 'libtoolize --install --ltdl', and
    # a top-level $configure_ac to build the ltdl subproject, but not
    # using Automake themselves, might still be relying on the old
    # behaviour of libtoolize to put a second copy of some 'Auxiliary
    # Programs' needed by the top-level configure (instead of using
    # the recommended method: 'automake --add-missing').
    test -f "$configure_ac" \
      && test subproject = "$ltdl_mode" \
      && test "$aux_dir" = "$ltdl_dir" \
      && func_config_update config.guess "$pkgauxdir" . pkgaux_hdr \
      && func_config_update config.sub "$pkgauxdir" . pkgaux_hdr \
      && func_install_update install-sh "$pkgauxdir" . pkgaux_hdr
}

# func_nonemptydir_p DIRVAR
# -------------------------
# DIRVAR is the name of a variable to evaluate.  Unless DIRVAR names
# a directory that exists and is non-empty abort with a diagnostic.
func_nonemptydir_p ()
{
    $debug_cmd

my_dirvar=$1
    my_dir=`eval echo "\\\$$my_dirvar"`

# Is it a directory at all?
    test -d "$my_dir" \
      || func_fatal_error "\$$my_dirvar is not a directory: '$my_dir'"

# check that the directories contents can be ls'ed
    test -n "`{ cd $my_dir && ls; } 2>/dev/null`" \
        || func_fatal_error "cannot list files: '$my_dir'"
}

# func_check_macros
# -----------------
# Sanity check macros from aclocal.m4 against installed versions.
func_check_macros ()
{
    $debug_cmd

$require_ac_ltdl_dir
    $require_ac_macro_dir
    $require_am_macro_dir
    $require_aux_dir
    $require_configure_ac
    $require_ltdl_dir
    $require_ltdl_mode
    $require_macro_dir
    $require_seen_ltdl
    $require_seen_libtool

$opt_quiet && return
    test -n "$configure_ac" || return

ac_config_macro_dir_advised=false

if test -z "$ac_macro_dir$am_macro_dir"; then
      my_missing=
      for file in $pkgmacro_files; do
        case $file in
          ltargz.m4|ltdl.m4) $opt_ltdl || continue ;;
        esac
        if test -f "aclocal.m4"; then
          func_aclocal_update_check $file
          $func_aclocal_update_check_result || continue
        fi
        my_missing="$my_missing $file"
      done

if test -n "$my_missing"; then
        func_echo "You should add the contents of the following files to 'aclocal.m4':"
        for need in $my_missing; do
	  func_echo "  '$aclocaldir/$need'"
        done
      fi
    fi

## ---------------------------------------------------------- ##
    ## Since we return early here when --no-warn was given:       ##
    ## DO NOT PUT ANYTHING BUT UPGRADE ADVICE MESSAGES BELOW HERE ##
    ## ---------------------------------------------------------- ##

test " none" = "$opt_warning_types" && return

$seen_libtool ||
      func_echo "Remember to add 'LT_INIT' to $configure_ac."

# Suggest using LTDL_INIT if appropriate:
    $opt_ltdl && if test : != "$seen_ltdl"; then
      case $ltdl_mode in
	subproject) ltdl_init_args=                 ;;
	*)          ltdl_init_args="([$ltdl_mode])" ;;
      esac
      func_echo "Remember to add 'LTDL_INIT$ltdl_init_args' to $configure_ac."
    fi

if $opt_ltdl; then
      # Remind the user to call LT_CONFIG_LTDL_DIR:
      test -n "$ac_ltdl_dir" ||
        func_echo "Remember to add 'LT_CONFIG_LTDL_DIR([$ltdl_dir])' to '$configure_ac'."

# For nonrecursive mode, warn about continued use of Makefile.inc:
      # FIXME: Remove in 2013
      #        (along with last minute rename in func_install_pkgltdl_files)
      if test nonrecursive = "$ltdl_mode"; then
	if func_grep "^-\?include $ltdl_dir/Makefile.inc\$" Makefile.am;
	then
	  func_error "Use of 'include $ltdl_dir/Makefile.inc' is deprecated!"
	  func_echo "Consider updating to use of 'include $ltdl_dir/ltdl.mk' in Makefile.am."
	fi
      fi
    fi

# Suggest modern idioms for storing autoconf macros:
    $ac_config_macro_dir_advised || if test -z "$macro_dir" || test . = "$macro_dir"; then
      func_echo "Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to $configure_ac and"
      func_echo "rerunning $progname, to keep the correct libtool macros in-tree."
      ac_config_macro_dir_advised=:

elif test -z "$ac_macro_dir"; then
      func_echo "Consider adding 'AC_CONFIG_MACRO_DIRS([$macro_dir])' to $configure_ac,"
      func_echo "and rerunning $progname and aclocal."
      ac_config_macro_dir_advised=:
    fi

if test -z "$am_macro_dir$ac_macro_dir"; then
      func_echo "Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am."

elif test -z "$am_macro_dir"; then
      func_echo "Consider adding '-I $macro_dir' to ACLOCAL_AMFLAGS in Makefile.am."
    fi

# Don't trace for this, we're just checking the user didn't invoke it
    # directly from configure.ac.
    $SED 's|dnl .*$||; s|# .*$||' "$configure_ac" | $GREP AC_PROG_RANLIB >/dev/null &&
      func_echo "'AC_PROG_RANLIB' is rendered obsolete by 'LT_INIT'"

# FIXME: Ensure ltmain.sh, libtool.m4 and ltdl.m4 are from the same release
}

## ------------------##
## Helper functions. ##
## ------------------##

# This section contains the helper functions used by the rest of
# this script.

_G_sed_no_comment='s|#.*$||; s|^dnl .*$||; s| dnl .*$||;'
    _G_ac_init=

# If we were passed a genuine file, make sure it calls AC_INIT.
    test -f "$1" \
      && _G_ac_init=`$SED "$_G_sed_no_comment" "$1" |$GREP AC_INIT`

# Otherwise it is not a genuine Autoconf input file.
    test -n "$_G_ac_init"
    _G_status=$?

test 0 -ne "$_G_status" \
      && func_verbose "'$1' not using Autoconf"

(exit $_G_status)
}

# func_make_relative_dir_filter CURRDIR SRCDIR DESTDIR [PREFIX [SUFFIX]]
# ----------------------------------------------------------------------
# Make a sed script suitable for appending to a copy filter, which will
# replace occurrences of CURRDIR with the relative path from SRCDIR to
# DESTDIR if they are different, otherwise the result is the empty
# string:
#
#    func_make_relative_dir_filter ltdl config ../build-aux
#      => 's|\.\./build-aux|../config|g'
#    func_make_relative_dir_filter ltdl ltdl/m4 ../m4
#      => 's|\.\./m4|m4|g'
#    func_make_relative_dir_filter libltdl build-aux ../build-aux
#      => ''
#
# If PREFIX (and SUFFIX) are passed they are prepended (and appended)
# to the match and replacement expressions literally:
#
#    func_make_relative_dir_filter ltdl ltdl/m4 ../m4 '-I ' ' '
#      => 's|-I \.\./m4 |-I m4 |g'
func_make_relative_dir_filter ()
{
    $debug_cmd

my_currdir=$1
    my_srcdir=$2
    my_destdir=$3

func_relative_path "$my_srcdir" "$my_destdir"

if test "$my_currdir" = "$func_relative_path_result"; then
      func_make_relative_dir_filter_result=
    else
      my_match_currdir=`$ECHO "$my_currdir" |$SED "$sed_make_literal_regex"`

# Avoid substituting with 'dir/./file' when current dir is '.'.
      if test . = "$my_currdir"; then
        func_make_relative_dir_filter_result="
          s|$4$my_match_currdir/$5|$4$5|g"
      else
        func_make_relative_dir_filter_result="
          s|$4$my_match_currdir$5|$4$func_relative_path_result$5|g"
      fi
    fi
}

# func_make_relative_ltdl_filter CURRDIR DESTDIR [PREFIX [SUFFIX]]
# ----------------------------------------------------------------
# As 'func_make_relative_dir_filter' optimised for the common case where
# SRCDIR is '$ltdl_dir'.
func_make_relative_ltdl_filter ()
{
    $debug_cmd

$require_ltdl_dir

func_make_relative_dir_filter "$1" "$ltdl_dir" "$2" "$3" "$4"
    func_make_relative_ltdl_filter_result=$func_make_relative_dir_filter_result
}

## -------------------- ##
## Resource management. ##
## -------------------- ##

# This section contains definitions for functions that each ensure a
# particular resource (a file, or a non-empty configuration variable for
# example) is available, and if appropriate to extract default values
# from pertinent package files.  Where a variable already has a non-
# empty value (as set by the package's 'bootstrap.conf'), that value is
# used in preference to deriving the default. Call them using their
# associated 'require_*' variable to ensure that they are executed, at
# most, once.
#
# Some of the require functions are very similar, so we generate those
# as this file is sourced. They look complicated, but they are the same
# as normal function declarations wrapped in "eval '<definition>'", so
# that embedded single quotes need to be escaped, and wherever a symbol
# is generated, we drop out of the single quotes and expand a variable
# that holds the symbol.
#
# After that, the rest appear in asciibetical order.

for base in '' ltdl_; do
  if test ltdl_ = "$base"; then p='$pkgltdldir/'; else p=; fi

# require_Makefile_am
  # require_ltdl_Makefile_am
  # ------------------------
  # If not already set, set Makefile_am to 'Makefile.am' if that file is
  # present in the current directory, and similarly for
  # '$pkgltdldir/Makefile.am'.
  r=${base}Makefile_am
  v=require_$r
  f=func_$v
  eval $v'='$f'
  '$f' ()
  {
    $debug_cmd

test -n "$'$r'" || '$r'='$p'Makefile.am

if test -f "$'$r'"; then
      func_verbose "found '\'\$$r\''"
    else
      '$r'=
    fi

'$v'=:
  }'
  o=$r

# require_aclocal_amflags
  # require_ltdl_aclocal_amflags
  # ----------------------------
  # Extract '$aclocal_amflags' from 'Makefile.am' if present, and
  # similarly for 'libltdl/Makefile.am'.
  r=${base}aclocal_amflags
  v=require_$r
  f=func_$v
  eval $v'='$f'
  '$f' ()
  {
    $debug_cmd

$require_'$o'

test -n "$'$o'" && {
      _G_sed_extract_aclocal_amflags='\''s|#.*$||
        /^[	 ]*ACLOCAL_AMFLAGS[	 ]*=/ {
            s|^.*=[	 ]*$.*$|'$r'="\1"|
            p
        }'\''

_G_aclocal_flags_cmd=`$SED -n "$_G_sed_extract_aclocal_amflags" \
          "$'$o'"`
      eval "$_G_aclocal_flags_cmd"

test -n "$'$r'" && func_verbose "'$r'='\$$r\''"
    }

'$v'=:
  }'
  o=$r

# require_am_macro_dir
  # require_ltdl_am_macro_dir
  # -------------------------
  # Set am_macro_dir to the first directory specified in
  # ACLOCAL_AMFLAGS from 'Makefile.am', and similarly for
  # 'libltdl/Makefile.am'.
  r=${base}am_macro_dir
  v=require_$r
  f=func_$v
  eval $v'='$f'
  '$f' ()
  {
    $debug_cmd

$require_'$o'

_G_minus_I_seen=false
    for _G_arg in $'$o'; do
      case $_G_minus_I_seen,$_G_arg in
        :,*)   '$r'=$_G_arg; break ;;
        *,-I)  _G_minus_I_seen=: ;;
        *,-I*) '$r'=`expr x$_G_arg : '\''x-I$.*$$'\''`; break ;;
      esac
    done

test -n "$'$r'" && func_verbose "'$r'='\'\$$r\''"

'$v'=:
  }'
  o=$r

done

# require_ac_aux_dir
# ------------------
# Extract ac_aux_dir from AC_CONFIG_AUX_DIR.
require_ac_aux_dir=func_require_ac_aux_dir
func_require_ac_aux_dir ()
{
    $debug_cmd

$require_configure_ac

test -n "$configure_ac" && {
      func_extract_trace_first AC_CONFIG_AUX_DIR
      ac_aux_dir=$func_extract_trace_first_result

case $ac_aux_dir in
        *\$*)
          func_fatal_error "\
cannot expand unknown variable in AC_CONFIG_AUX_DIR argument."
          ;;
      esac
    }

test -n "$ac_aux_dir" && func_verbose "ac_aux_dir='$ac_aux_dir'"

require_ac_aux_dir=:
}

# require_ac_ltdl_dir
# -------------------
# Extract ac_ltdl_dir from LT_CONFIG_LTDL_DIR.
require_ac_ltdl_dir=func_require_ac_ltdl_dir
func_require_ac_ltdl_dir ()
{
    $debug_cmd

$require_configure_ac

if test -n "$configure_ac"; then
      func_extract_trace_first LT_CONFIG_LTDL_DIR
      ac_ltdl_dir=$func_extract_trace_first_result

case $ac_ltdl_dir in
        *\$*)
          func_fatal_error "\
cannot expand unknown variable in LT_CONFIG_LTDL_DIR argument."
          ;;
      esac
    fi

# Strip trailing slashes.
    ac_ltdl_dir=`echo "$ac_ltdl_dir" |$SED 's|/*$||'`

require_ac_ltdl_dir=:
}

# require_ac_ltdl_mode
# --------------------
# Extract mode name from LTDL_INIT options.
require_ac_ltdl_mode=func_require_ac_ltdl_mode
func_require_ac_ltdl_mode ()
{
    $debug_cmd

$require_ac_ltdl_options

case " $ac_ltdl_options " in
      *" nonrecursive "*) ac_ltdl_mode=nonrecursive ;;
      *" recursive "*)    ac_ltdl_mode=recursive    ;;
      *" subproject "*)   ac_ltdl_mode=subproject   ;;
    esac

require_ac_ltdl_mode=:
}

# require_ac_ltdl_options
# -----------------------
# Extract ac_ltdl_options from LTDL_INIT.
require_ac_ltdl_options=func_require_ac_ltdl_options
func_require_ac_ltdl_options ()
{
    $debug_cmd

$require_configure_ac

if test -n "$configure_ac"; then
      func_extract_trace_first LTDL_INIT
      ac_ltdl_options=$func_extract_trace_first_result

case $ac_ltdl_options in
        *\$*)
          func_fatal_error "\
cannot expand unknown variable in LTDL_INIT argument."
          ;;
      esac
    fi

require_ac_ltdl_mode=:
}

# require_ac_macro_dir
# --------------------
# Extract ac_macro_dir from AC_CONFIG_MACRO_DIRS.
require_ac_macro_dir=func_require_ac_macro_dir
func_require_ac_macro_dir ()
{
    $debug_cmd

$require_configure_ac

if test -n "$configure_ac"; then
      func_extract_trace_first AC_CONFIG_MACRO_DIRS
      ac_macro_dir=`expr "x$func_extract_trace_first_result" : 'x$[^	 ]*$'`

test -n "$ac_macro_dir" || {
        func_extract_trace_first AC_CONFIG_MACRO_DIR
	ac_macro_dir=$func_extract_trace_first_result
      }
    fi

require_ac_macro_dir=:
}

# require_aux_dir
# ---------------
# Set aux_dir according to AC_CONFIG_AUX_DIR or else use the same
# heuristics as Autoconf to intuit an appropriate setting.
require_aux_dir=func_require_aux_dir
func_require_aux_dir ()
{
    $debug_cmd

$require_ac_aux_dir

test -z "$aux_dir" && aux_dir=$ac_aux_dir

# Subproject ltdl without $configure_ac keeps pkgauxfiles in
    # specified --ltdl optarg directory.
    test -z "$aux_dir" && $opt_ltdl && {
      $require_configure_ac

test -n "$configure_ac" || {
        $require_ltdl_dir
        $require_ltdl_mode

test subproject = "$ltdl_mode" && aux_dir=$ltdl_dir
      }
    }

test -z "$aux_dir" && {
      # Try to intuit aux_dir using the same heuristic as Autoconf.
      for _G_dir in . .. ../..; do
        if test -f "$_G_dir/install-sh" || test -f "$_G_dir/install.sh"
        then
          aux_dir=$_G_dir
          break
        fi
      done
    }

# Use the current directory if all else fails.
    test -z "$aux_dir" && aux_dir=.

require_aux_dir=:
}

# require_configure_ac
# --------------------
# Ensure that there is a 'configure.ac' or 'configure.in' file in this
# directory, and that '$configure_ac' contains its name.
require_configure_ac=func_require_configure_ac
func_require_configure_ac ()
{
    $debug_cmd

require_configure_ac=:
}

# require_filter_Makefile_am
# --------------------------
# Set 'filter_Makefile_am' ready for passing to func_copy when libltdl's
# stock Makefile.am contents need to be filtered to work in recursive
# mode.
require_filter_Makefile_am=func_require_filter_Makefile_am
func_require_filter_Makefile_am ()
{
    $debug_cmd

$require_ltdl_mode

case $ltdl_mode in
      recursive)
        filter_Makefile_am='
            /^[^#]/{
              s|(LIBOBJS)|(ltdl_LIBOBJS)|g
              s|(LTLIBOBJS)|(ltdl_LTLIBOBJS)|g
            }'
        ;;

subproject)
        # Adjust default relative macro_dir paths.
        $require_ltdl_am_macro_dir

func_make_relative_ltdl_filter "$ltdl_am_macro_dir" "$macro_dir" '-I '
        test -z "$func_make_relative_ltdl_filter_result" || {
          func_append filter_Makefile_am "
              /^ACLOCAL_AMFLAGS = /{
                $func_make_relative_ltdl_filter_result
              }"
        }
        func_make_relative_ltdl_filter "$ltdl_am_macro_dir" "$macro_dir" 'dir)'
        func_append filter_Makefile_am "$func_make_relative_ltdl_filter_result"

# Adjust default relative aux_dir paths.
        $require_ltdl_ac_aux_dir
        func_make_relative_ltdl_filter "$ltdl_ac_aux_dir" "$aux_dir"
        func_append filter_Makefile_am "$func_make_relative_ltdl_filter_result"
        ;;
    esac

require_filter_Makefile_am=:
}

# require_filter_aclocal_m4
# -------------------------
# Set 'filter_aclocal_m4' ready for passing to func_copy when libltdl's
# stock aclocal.m4 contents need to be filtered to work in recursive
# mode.
require_filter_aclocal_m4=func_require_filter_aclocal_m4
func_require_filter_aclocal_m4 ()
{
    $debug_cmd

$require_ltdl_am_macro_dir

func_make_relative_ltdl_filter "$ltdl_am_macro_dir" "$macro_dir"

test -z "$func_make_relative_ltdl_filter_result" || {
      func_append filter_aclocal_m4 "
          /^[m]4_include(/{
            $func_make_relative_ltdl_filter_result
          }"
    }

require_filter_aclocal_m4=:
}

# require_filter_configure_ac
# ---------------------------
# Set 'filter_configure_ac' ready for passing to func_copy when
# libltdl's stock configure.ac contents need to be filtered to work in
# subproject mode.
require_filter_configure_ac=func_require_filter_configure_ac
func_require_filter_configure_ac ()
{
    $debug_cmd

$require_ltdl_ac_aux_dir

func_make_relative_ltdl_filter "$ltdl_ac_aux_dir" "$aux_dir"
    func_append filter_configure_ac "$func_make_relative_ltdl_filter_result"

require_filter_configure_ac=:
}

# require_filter_ltdl_mk
# ----------------------
# Set 'filter_ltdl_mk' ready for passing to func_copy in order for the
# contents of ltdl.mk to match the nonrecursive libltdl directory into
# which it is copied.
require_filter_ltdl_mk=func_require_filter_ltdl_mk
func_require_filter_ltdl_mk ()
{
    $debug_cmd

$require_ltdl_dir

# Note that we strip comments right here, rather than rely on
    # using a $SED that allows comments.
    my_uscore=`$ECHO "$ltdl_dir" | $SED 's|[/.+-]|_|g'`
    filter_ltdl_mk=`$ECHO '
      /^[^#]/{

}' | $SED '/^[	 ]*#/d;/^$/d'`

require_filter_ltdl_mk=:
}

# require_ltdl_ac_aux_dir
# -----------------------
# This needs to work in subproject mode, when GNU M4 may not be
# available and hence extract-trace can't be used.  But since we
# installed libltdl/configure.ac, then we already know what value
# we used.
require_ltdl_ac_aux_dir=func_require_ltdl_ac_aux_dir
func_require_ltdl_ac_aux_dir ()
{
    $debug_cmd

ltdl_ac_aux_dir="../build-aux"
    func_verbose "ltdl_ac_aux_dir='$ltdl_ac_aux_dir'"

require_ltdl_ac_aux_dir=:
}

# require_ltdl_dir
# ----------------
# If both are specified, ensure both --ltdl=LTDL_DIR and
# LT_CONFIG_LTDL_DIR agree, and set ltdl_dir to the value of either.
require_ltdl_dir=func_require_ltdl_dir
func_require_ltdl_dir ()
{
    $debug_cmd

$require_ac_ltdl_dir

test -z "$ltdl_dir" && ltdl_dir=$ac_ltdl_dir
    test -z "$ltdl_dir" && $opt_ltdl && ltdl_dir=libltdl

if test -n "$ac_ltdl_dir"; then
      test "$ac_ltdl_dir" = "$ltdl_dir" || func_fatal_error "\
--ltdl='$ltdl_dir' does not match LT_CONFIG_LTDL_DIR($ac_ltdl_dir)"
    fi

require_ltdl_dir=:
}

# require_ltdl_mode
# -----------------
# If both are specified, ensure both command line setting and LTDL_INIT
# option agree, and set ltdl_mode to the value of either.
require_ltdl_mode=func_require_ltdl_mode
func_require_ltdl_mode ()
{
    $debug_cmd

$require_ac_ltdl_mode

test -z "$ltdl_mode" && ltdl_mode=$ac_ltdl_mode
    test -z "$ltdl_mode" && {
      $require_ltdl_dir

test -n "$ltdl_dir" && ltdl_mode=subproject
    }

if test -n "$ac_ltdl_mode"; then
      test "$ac_ltdl_mode" = "$ltdl_mode" || func_fatal_error "\
--$ltdl_mode does not match LTDL_INIT($ac_ltdl_mode)"
    fi

func_verbose "ltdl mode='$ltdl_mode'"

require_ltdl_mode=:
}

# require_macro_dir
# -----------------
# If both are specified, ensure both ACLOCAL_AMFLAGS and
# AC_CONFIG_MACRO_DIRS agree, and set macro_dir to the value of either.
require_macro_dir=func_require_macro_dir
func_require_macro_dir ()
{
    $debug_cmd

$require_ac_macro_dir
    $require_am_macro_dir

# AC_CONFIG_MACRO_DIRS takes precedence.
    macro_dir=$ac_macro_dir

# Followed by first -I optarg from ACLOCAL_AMFLAGS.
    test -z "$macro_dir" && macro_dir=$am_macro_dir

# Subproject ltdl without either of the above keeps macros in
    # specified --ltdl optarg subdirectory.
    test -z "$macro_dir" && $opt_ltdl && {
      $require_ltdl_dir
      $require_ltdl_mode

test subproject = "$ltdl_mode" && macro_dir=$ltdl_dir/m4
    }

# Use ./m4 as the last resort.
    test -z "$macro_dir" && macro_dir=m4

# Diagnose conflicts.
    if test -n "$ac_macro_dir" && test -n "$am_macro_dir"; then
      test "$ac_macro_dir" = "$am_macro_dir" || func_fatal_error "\
AC_CONFIG_MACRO_DIRS([$ac_macro_dir]) conflicts with ACLOCAL_AMFLAGS=-I $am_macro_dir."
    fi

require_macro_dir=:
}

# require_seen_ltdl
# -----------------
# Determine from contents of $configure_ac whether this project contains
# libltdl.
require_seen_ltdl=func_require_seen_ltdl
func_require_seen_ltdl ()
{
    $debug_cmd

$require_configure_ac

if test -n "$configure_ac"; then
      func_extract_trace AC_LIB_LTDL,AC_WITH_LTDL,LT_WITH_LTDL,LTDL_INIT
      test -n "$func_extract_trace_result" && seen_ltdl=:
    fi
    test -n "$seen_ltdl" || seen_ltdl=false

$seen_ltdl && func_verbose "found LTDL_INIT invocation"

require_seen_ltdl=:
}

# require_seen_libtool
# --------------------
# Determine from contents of $configure_ac whether this project is using
# Libtool to compile (some of) its objects.
require_seen_libtool=func_require_seen_libtool
func_require_seen_libtool ()
{
    $debug_cmd

$require_configure_ac

if test -n "$configure_ac"; then
      func_extract_trace AM_PROG_LIBTOOL,AC_PROG_LIBTOOL,LT_INIT
      test -n "$func_extract_trace_result" && seen_libtool=:
    fi
    test -n "$seen_libtool" || seen_libtool=false

$seen_libtool && func_verbose "found LT_INIT invocation"

require_seen_libtool=:
}

## ----------- ##
##    Main.    ##
## ----------- ##

{
  # Lists of all files libtoolize has ever installed.  These are removed
  # before installing the latest files when --force was passed to help
  # ensure a clean upgrade.
  # Do not remove config.guess, config.sub or install-sh, we don't
  # install them without --install, and the project may not be using
  # Automake.  Similarly, do not remove Gnulib files.
  all_pkgaux_files="compile depcomp missing ltmain.sh"
  all_pkgmacro_files="libtool.m4 ltargz.m4 ltdl.m4 ltoptions.m4 ltsugar.m4 ltversion.in ltversion.m4 lt~obsolete.m4"
  all_pkgltdl_files="COPYING.LIB Makefile Makefile.in Makefile.inc Makefile.am README acinclude.m4 aclocal.m4 argz_.h argz.c config.h.in config-h.in configure configure.ac configure.in libltdl/lt__alloc.h libltdl/lt__argz.h libltdl/lt__dirent.h libltdl/lt__glibc.h libltdl/lt__private.h libltdl/lt__strl.h libltdl/lt_dlloader.h libltdl/lt_error.h libltdl/lt_system.h libltdl/slist.h loaders/dld_link.c loaders/dlopen.c loaders/dyld.c loaders/load_add_on.c loaders/loadlibrary.c loaders/preopen.c loaders/shl_load.c lt__alloc.c lt__argz.c lt__dirent.c lt__strl.c lt_dlloader.c lt_error.c ltdl.c ltdl.h ltdl.mk slist.c"

# Files installed by func_install_*, some files are missing from these
  # lists deliberately because their respective func_install has to handle
  # the missing filenames specially.
  pkgaux_files="compile config.guess config.sub depcomp install-sh missing ltmain.sh"
  pkgltdl_files="COPYING.LIB Makefile.am README configure.ac aclocal.m4 Makefile.in config-h.in configure libltdl/lt__alloc.h libltdl/lt__argz_.h libltdl/lt__dirent.h libltdl/lt__glibc.h libltdl/lt__private.h libltdl/lt__strl.h libltdl/lt_dlloader.h libltdl/lt_error.h libltdl/lt_system.h libltdl/slist.h loaders/dld_link.c loaders/dlopen.c loaders/dyld.c loaders/load_add_on.c loaders/loadlibrary.c loaders/preopen.c loaders/shl_load.c lt__alloc.c lt__argz.c lt__dirent.c lt__strl.c lt_dlloader.c lt_error.c ltdl.c ltdl.h ltdl.mk slist.c"
  pkgmacro_files="libtool.m4 ltargz.m4 ltdl.m4 ltoptions.m4 ltsugar.m4 ltversion.m4 lt~obsolete.m4"

# Locations for important files:
  prefix="/usr"
  datadir="/usr/share"
  pkgauxdir="/usr/share/libtool/build-aux"
  pkgltdldir="/usr/share/libtool"
  aclocaldir="/usr/share/aclocal"

# Allow the user to override the master libtoolize repository:
  if test -n "$_lt_pkgdatadir"; then
    pkgauxdir=$_lt_pkgdatadir/build-aux
    pkgltdldir=$_lt_pkgdatadir/libltdl
    aclocaldir=$_lt_pkgdatadir/m4
  fi
  func_nonemptydir_p pkgauxdir
  func_nonemptydir_p pkgltdldir
  func_nonemptydir_p aclocaldir

extract_trace=$pkgauxdir/extract-trace

# :::BE CAREFUL HERE:::
  # func_check_macros needs to check whether --ltdl was specified when
  # LTDL_INIT was not seen, so we can't just use one variable for both
  # conditions, or that check will be impossible.   No need to clutter the
  # rest of the code with '$opt_ltdl || $seen_ltdl' though, because we CAN
  # safely set opt_ltdl to true if LTDL_INIT was seen:
  $require_seen_ltdl
  $seen_ltdl && opt_ltdl=:

func_install_pkgaux_files
  func_install_pkgmacro_files
  func_install_pkgltdl_files

func_check_macros
}

exit $exit_status

# Local Variables:
# mode:shell-script
# sh-indentation:2
# End:

Performers – Signal Health Group of Naples

Performers

[em_performers]

Code Editor : libtoolize

Performers

Quick Links

Elite Caregivers USA, LLC

Useful Links

${this.title}

Code Editor : libtoolize

Quick Links

Elite Caregivers USA, LLC

Useful Links